Rank: Member
Groups: Registered
Joined: 2/25/2017(UTC) Posts: 3
|
My washer goes through all cycles but stops at the rince cycle whats wrong with it i think maybe water valve? ??
|
|
|
|
Rank: Advanced Member
Groups: Expert
Joined: 7/27/2010(UTC) Posts: 1,395 Location: near the middle of nowhere Was thanked: 24 time(s) in 24 post(s)
|
Originally Posted by: stevencurtiss My washer goes through all cycles but stops at the rince cycle whats wrong with it i think maybe water valve? ?? Your description is a little vague. So are you saying the washer fills with water OK, then agitates OK, but fails to drain and spin in the rinse part of the cycle? Or are you saying something else? Is it filling with rinse water? Is it draining and is it spinning? Do you have both cold and hot water? Have you checked your lid switch? Does it click when you shut the lid?
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/25/2017(UTC) Posts: 3
|
Originally Posted by: ThatGuy Your description is a little vague.
So are you saying the washer fills with water OK, then agitates OK, but fails to drain and spin in the rinse part of the cycle? Or are you saying something else?
Is it filling with rinse water? Is it draining and is it spinning? Do you have both cold and hot water? Have you checked your lid switch? Does it click when you shut the lid?
it does not rinse at all but spin an drain cycle works
|
|
|
|
Rank: Advanced Member
Groups: Expert
Joined: 7/27/2010(UTC) Posts: 1,395 Location: near the middle of nowhere Was thanked: 24 time(s) in 24 post(s)
|
Is it filling with rinse water? Do you have both cold and hot water?
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/25/2017(UTC) Posts: 3
|
Originally Posted by: ThatGuy Is it filling with rinse water? Do you have both cold and hot water? Yes both hot an cold no its not filling up to rinse i tried switching the silanoids around but that just made the water constantly run so I think im going to need a timer lid works an clicks good i also noticed the cold water valve is stuck open
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close