Rank: Member
Groups: Registered
Joined: 2/15/2017(UTC)
Posts: 2
|
Washing machine goes into wash stops along the way with an error code. it beeps 3 times then flashes once. not sure if im reading this correctly as f0e1 the manual says with that code washer is detecting a load during cleaning cycle, or mechanical friction. Unit is not in cleaning mode and drum appears to spin very smoothly in both directions. any ideas?
Brian
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/2/2017(UTC)
Posts: 422
|
At what point does it stop? Random or always same spot?
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/15/2017(UTC)
Posts: 2
|
it washes for a little bit then stops always in the same spot never makes it into spin cycle Originally Posted by: BrianNstl  Washing machine goes into wash stops along the way with an error code. it beeps 3 times then flashes once. not sure if im reading this correctly as f0e1 the manual says with that code washer is detecting a load during cleaning cycle, or mechanical friction. Unit is not in cleaning mode and drum appears to spin very smoothly in both directions. any ideas?
Brian
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
