2 Pages12> Go to Page...

F99 Code on power up Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: MHWE450WW00	Brand: Maytag	Age: 5 - 10 years
Previous Topic Next Topic

tombishop22		#1 Posted : Thursday, August 11, 2016 7:04:17 AM(UTC)
Rank: Member Groups: Registered Joined: 8/11/2016(UTC) Posts: 7		:confused: Washer would not high speed spin after replacing MCU. Replaced CCU and now will not start. F99 code only.
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

brobriffin		#2 Posted : Thursday, August 11, 2016 4:41:52 PM(UTC)
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		F99 NOT SUPPORTED User selected on the UI the unsupported Cycle on the CCU. Mismatch of User Interface and CCU or corrupted EEPROM. Possible Causes/Procedure 1. Perform Service Cycle to pair the UI and CCU SW. 2. Replace User Interface. If failure still present: 3. Also replace the CCU.
		WWW
User Profile View All Posts by User View Thanks

tombishop22		#3 Posted : Monday, August 15, 2016 9:48:02 AM(UTC)
Rank: Member Groups: Registered Joined: 8/11/2016(UTC) Posts: 7		[MODEL][/MODEL] What is "Service Cycle"? I tried the diagnostic process and only got flashing lights along with "F99" flashing on the display. Is there a way to tell whether the problem is in the CCU or in the UI?
User Profile View All Posts by User View Thanks

brobriffin		#4 Posted : Wednesday, August 17, 2016 6:42:01 AM(UTC)
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		https://www.manualowl.com/m/Mayt...W/Manual/258287?page=124 This manual might help.
		WWW
User Profile View All Posts by User View Thanks

tombishop22		#5 Posted : Thursday, August 18, 2016 7:46:11 AM(UTC)
Rank: Member Groups: Registered Joined: 8/11/2016(UTC) Posts: 7		I wish the manual to this washer was written as well as the one you reference. The controls are very different on that machine though.
User Profile View All Posts by User View Thanks

brobriffin		#6 Posted : Thursday, August 18, 2016 5:52:49 PM(UTC)
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		I will keep searching for the service manual for this machine. Hopefully someone else on this forum might be able to pitch in!
		WWW
User Profile View All Posts by User View Thanks

tombishop22		#7 Posted : Friday, August 19, 2016 1:54:39 PM(UTC)
Rank: Member Groups: Registered Joined: 8/11/2016(UTC) Posts: 7		I have the service manual which came with the machine. The problem is that it does not have enough info to get me there. I am changing the CCU back to the old one for now to confirm that the machine returns to its previous state.
User Profile View All Posts by User View Thanks

tombishop22		#8 Posted : Monday, August 22, 2016 1:44:47 PM(UTC)
Rank: Member Groups: Registered Joined: 8/11/2016(UTC) Posts: 7		After reinstalling the old CCU board I now have an F71 fault. This seems to point to the UI causing the F99 with the new CCU. Am I thinking correctly?
User Profile View All Posts by User View Thanks

brobriffin		#9 Posted : Monday, August 22, 2016 2:08:46 PM(UTC)
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		Ah! Now a tangible code which indicates the motor control board is the culprit. So likely this is your problem. Try replacing this Whirlpool WP8183196 Electronic Control Board - AppliancePartsPros.com It should fix your issues, if not don't forget our Buy n Try policy, you can read about it if you click the 365-days return link.....
		WWW
User Profile View All Posts by User View Thanks

tombishop22		#10 Posted : Tuesday, August 23, 2016 7:41:48 AM(UTC)
Rank: Member Groups: Registered Joined: 8/11/2016(UTC) Posts: 7		Thanks for the reply. I have replaced the MCU twice. The second time it made no difference in my low speed spin. I still have two MCU boards, one of which I have not used. I could easily change again but I am skeptical. I guess no harm done tho.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (4)

2 Pages12> Go to Page...