Heavy Duty Whirlpool Commercial Washer Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: CAM2742TQ	Brand: Whirlpool	Age: Less than 1 year
Previous Topic Next Topic

justmargie1		#1 Posted : Monday, July 29, 2013 8:33:43 AM(UTC)
Rank: Member Groups: Registered Joined: 7/29/2013(UTC) Posts: 4		I have 2 Commercial Whirlpool Washers and I am having the same problem with both of them ... the rinse cycle only fills about 1/4 water ... is there a switch that controls the amount of water disbursed? Or is the control panel bad? The owner is cheap and I was wondering if they could control the amount of water used?
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

fairbank56		#2 Posted : Monday, July 29, 2013 9:10:03 AM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		This is normal operation due to government mandated water and energy restrictions. It can be bypassed for use outside of the U.S. There is a "feature connector" behind the control panel. Unplug the violet/yellow wire connection and plug in the feature connector. Now the rinse level will be the same as wash level. Eric
User Profile View All Posts by User View Thanks

justmargie1		#3 Posted : Monday, July 29, 2013 9:40:11 AM(UTC)
Rank: Member Groups: Registered Joined: 7/29/2013(UTC) Posts: 4		thank you very much ... :-)
User Profile View All Posts by User View Thanks

justmargie1		#4 Posted : Tuesday, July 30, 2013 1:41:46 PM(UTC)
Rank: Member Groups: Registered Joined: 7/29/2013(UTC) Posts: 4		is the "feature connector" in the box above the coin box?
User Profile View All Posts by User View Thanks

fairbank56		#5 Posted : Tuesday, July 30, 2013 4:02:49 PM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		Should be behind the control panel. Trace wires between the two pressure switches and water level switch to locate it. Eric
User Profile View All Posts by User View Thanks

justmargie1		#6 Posted : Tuesday, July 30, 2013 8:57:14 PM(UTC)
Rank: Member Groups: Registered Joined: 7/29/2013(UTC) Posts: 4		thanks again ... Margie :-)
User Profile View All Posts by User View Thanks

g20zoom		#7 Posted : Friday, August 19, 2016 10:24:13 AM(UTC)
Rank: Member Groups: Registered Joined: 6/19/2008(UTC) Posts: 32		I have the same model but ending in TQ2. My tenant swears it's not right. She has been using it for 5 years. I ran it on the rinse. It's more like half full. Does this seem right?? g20zoom attached the following image(s):
User Profile View All Posts by User View Thanks

g20zoom		#8 Posted : Friday, August 19, 2016 11:18:08 AM(UTC)
Rank: Member Groups: Registered Joined: 6/19/2008(UTC) Posts: 32		Just in case. I think I see the purple yellow wire on the left of the brown board What wire do I connect in it place if out if the US? What does the feature wire look like? Thanks! g20zoom attached the following image(s):
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (2)