bottom element get warm not hot. i replaced it Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: PLEB30T8CCB	Brand: Frigidaire	Age: More than 10 years
Previous Topic Next Topic

bill weiss		#1 Posted : Monday, January 25, 2016 9:01:23 AM(UTC)
Rank: Member Groups: Registered Joined: 1/25/2016(UTC) Posts: 10		I replaced my bottom element on my upper oven, and it still only gets warm not hot. the upper element wrks fine
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

bill weiss		#2 Posted : Monday, January 25, 2016 12:59:45 PM(UTC)
Rank: Member Groups: Registered Joined: 1/25/2016(UTC) Posts: 10		Thank you for your help The resistance on the old element was 28 ohms. the upper element gets red. the lower element stays at approximtely 150 degrees there is no code indicated on the panel monitor
User Profile View All Posts by User View Thanks

bill weiss		#3 Posted : Monday, January 25, 2016 12:59:49 PM(UTC)
Rank: Member Groups: Registered Joined: 1/25/2016(UTC) Posts: 10		Thank you for your help The resistance on the old element was 28 ohms. the upper element gets red. the lower element stays at approximtely 150 degrees there is no code indicated on the panel monitor
User Profile View All Posts by User View Thanks

bill weiss		#4 Posted : Monday, January 25, 2016 1:03:18 PM(UTC)
Rank: Member Groups: Registered Joined: 1/25/2016(UTC) Posts: 10		there is no code in the monitor screen the upper element gets red, the lower stays at about 150 degrees. the resistance of the old was 28 ohms. THANK YOU VERY MUCH FOR YOUR HELP Bill
User Profile View All Posts by User View Thanks

bill weiss		#5 Posted : Tuesday, January 26, 2016 11:55:45 AM(UTC)
Rank: Member Groups: Registered Joined: 1/25/2016(UTC) Posts: 10		I appologise for not getting back to you sooner, i have been out. I put my hand on the lower element to feel the temp, and it never got hotter. Is their any way i could measure the voltage at any given spot, to see if it is the relay or board. Thanks for your help Bill
User Profile View All Posts by User View Thanks

bill weiss		#6 Posted : Tuesday, January 26, 2016 12:08:39 PM(UTC)
Rank: Member Groups: Registered Joined: 1/25/2016(UTC) Posts: 10		You have to excuse me i am illiterate when it comes to computers. i'm not sure i am sending the info right.My oven you push bake and set the temp you want, and when it reaches that temp it beaps Bill
User Profile View All Posts by User View Thanks

bill weiss		#7 Posted : Wednesday, January 27, 2016 12:27:29 PM(UTC)
Rank: Member Groups: Registered Joined: 1/25/2016(UTC) Posts: 10		If the sensor was bad, would that not allow the lower element to get hot, but will let the upper to get hot, if the sensor is ok, does that mean the relay board is bad, or do they call that the control board. thanks very much for your help Bill
User Profile View All Posts by User View Thanks

bill weiss		#8 Posted : Thursday, January 28, 2016 8:25:25 AM(UTC)
Rank: Member Groups: Registered Joined: 1/25/2016(UTC) Posts: 10		could the sensor be bad if the top element gets red hot and the bottom element only gets to about 120 degrees. thanks Bill
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (2)