Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Clock/Timer
Options
Go to last post Go to first unread
Model: CWE4020ACB Brand: Maytag Age: More than 10 years
Previous Topic Next Topic
Grady White  
#1 Posted : Sunday, January 10, 2016 10:30:53 AM(UTC)
Grady White

Rank: Member

Groups: Registered
Joined: 9/16/2012(UTC)
Posts: 6
When trying to set the clock or timer, the digits bounce around. When trying to increase the time the numbers might go up then down then up. Nothing feels bad with the shaft but... Any suggestions would be appreciated.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Sunday, January 10, 2016 10:39:58 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Parts for Maytag CWE4020ACB Oven - AppliancePartsPros.com

Could be the potentiometer (pot) is bad. If that is what is used to set the time.

Get a can of electronics contact cleaner.
Unplug the unit.
Unplug the timer if you have to.
Then spray cleaner into the pot while rotating it back and forth.
Be sure to leave it long enough for the vapors to dissipate before reapplying power.

If that does nothing then you may have to live with it.

Note that there are companies out there that repair obsolete timers, Google "appliance timer repair".
THIS FORUM IS DEAD!!!!!!!
Back to top
Grady White  
#3 Posted : Sunday, January 10, 2016 10:45:44 AM(UTC)
Grady White

Rank: Member

Groups: Registered
Joined: 9/16/2012(UTC)
Posts: 6
Thanks for the quick reply. It doesn't feel like a pot. More like some kind of gear since you can feel 'clicks'. Any idea as to the function of part ID 23 on the control panel diagram is for? Here's a link to the parts page:
http://www.appliancepartspros.c...12p015-60-ap4108308.html
Back to top
denman  
#4 Posted : Monday, January 11, 2016 3:04:14 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Sorry but I do not know.
THIS FORUM IS DEAD!!!!!!!
Back to top
Users browsing this topic
Similar Topics
is clock/timer and oven control board the same (Oven Repair (including Ranges and Cooktops))
by blazerbrad 10/4/2012 1:27:29 PM(UTC)
Replaced clock/timer/EOC board, now oven won't heat at all help! (Oven Repair (including Ranges and Cooktops))
by cantbakebeth 1/28/2012 11:52:55 AM(UTC)
How to replace oven clock/timer? (Oven Repair (including Ranges and Cooktops))
by aec393 12/15/2011 11:46:50 AM(UTC)
Clock/Timer (Oven Repair (including Ranges and Cooktops))
by bena8837 8/16/2011 5:48:27 PM(UTC)
New Clock/Timer panel won't work (Oven Repair (including Ranges and Cooktops))
by rarellano81625 3/3/2011 1:10:27 PM(UTC)
Gene! New clock/timer board, light stays on (Oven Repair (including Ranges and Cooktops))
by wolfbbg 10/5/2010 3:30:36 PM(UTC)
Broken Whirlpool clock/timer on oven (Oven Repair (including Ranges and Cooktops))
by HRCJohn 12/30/2009 4:49:01 PM(UTC)
Help with clock/timer (Oven Repair (including Ranges and Cooktops))
by jacktrouble 10/9/2009 2:08:33 PM(UTC)
Clock/timer Display Meltdown While Self Cleaning Oven (Oven Repair (including Ranges and Cooktops))
by WANAGO 5/14/2009 7:40:23 AM(UTC)
Clock/timer (Oven Repair (including Ranges and Cooktops))
by olefin32 6/1/2008 1:44:31 PM(UTC)
clock/timer bizzare behavior, no fault code (Oven Repair (including Ranges and Cooktops))
by workpot 4/24/2008 1:38:48 PM(UTC)
Frigidaire Gas oven Clock/timer Replacement (Oven Repair (including Ranges and Cooktops))
by ChuckH 2/26/2008 11:19:09 AM(UTC)
no error codes; is Clock/Timer EOC the problem? (Oven Repair (including Ranges and Cooktops))
by 2132mg 2/9/2008 11:02:36 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET