Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
BajaScout  
#1 Posted : Saturday, October 31, 2015 12:54:52 PM(UTC)
BajaScout

Rank: Member

Groups: Registered
Joined: 10/31/2015(UTC)
Posts: 4

Maytag MDB7749AWM1 dishwasher will not start.

Start and cancel buttons do not work. Other buttons do work.

Does run in diagnostic mode but will not cancel.

Did the keypad resistance checks per the tech sheet. Start and cancel buttons do not have continuity.

Pretty sure I need to replace the control panel.

For my model dishwasher MDB7749AWM1 it is gray plastic to match stainless steel.

What part number is the control panel for my model? Availability?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Sunday, November 1, 2015 1:50:03 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Parts for Maytag MDB7749AWM1 / Dishwasher - AppliancePartsPros.com

The tech sheet is too big to upload on this site so see the below link.
Un-click the use our download manager and then use the grey button to download it, otherwise the site may put software on your computer that you do not want.
Note that it is for a 7759 but the 7749 is the same.
Download MDB7759.pdf

The usual way to troubleshoot this is to check the pinouts/keys on the panel for continuity.
If bad keys are found replace the panel.
Then if it checks out OK then replace the control board.

Still a bit of a crap shoot but your odds are better.

It is best to check part numbers with a parts representative they have more info and knowledge when it comes to parts.
THIS FORUM IS DEAD!!!!!!!
BajaScout  
#3 Posted : Tuesday, November 17, 2015 4:36:47 PM(UTC)
BajaScout

Rank: Member

Groups: Registered
Joined: 10/31/2015(UTC)
Posts: 4

Received the control panel today. Took about 10 minutes to install. Dishwasher is working fine now! P/N for the stainless steel Maytag MDB7749AWM1 control panel is W1081151. Ordered it using the Appliance Pros 24/7 chat. Erica B. was very knowledgeable and helpful. Shipping took a week, but it had to travel across most of the USA. Part was a little expensive, but it saved me from buying another dishwasher. Very happy with my first Appliance PArts Pros experience including denman's expert volunteer help troubleshooting.
balperi  
#4 Posted : Tuesday, November 24, 2015 8:07:42 AM(UTC)
balperi

Rank: Member

Groups: Registered
Joined: 11/24/2015(UTC)
Posts: 4

UserPostedImagehas been bookmark, this seems like a very interesting thread
Users browsing this topic
Guest (2)
Similar Topics
GE Cafe dishwasher will not start (Dishwasher Repair)
by Guest 5/18/2023 11:11:14 PM(UTC)
Samsung dishwasher will not start wash cycle (Dishwasher Repair)
by relentless85 8/12/2016 5:57:33 PM(UTC)
kitchen aide dishwasher will not start (Dishwasher Repair)
by Edwin L Davis 4/26/2015 6:02:45 PM(UTC)
Kitchenaid dishwasher will not start and makes humming noise (Dishwasher Repair)
by jbritton@evisionsys.com 9/28/2014 9:08:26 AM(UTC)
Maytag dishwasher will not start (Dishwasher Repair)
by timwhitten 3/24/2014 2:15:09 PM(UTC)
Dishwasher will not start (Dishwasher Repair)
by genegilbert 11/18/2012 6:45:22 AM(UTC)
Dishwasher will not start (Dishwasher Repair)
by okchiller1 10/25/2012 6:39:31 AM(UTC)
Dishwasher Will Not Start (Dishwasher Repair)
by pfoss76 7/10/2012 2:21:43 PM(UTC)
Frigidaire Dishwasher will not start wash cycle (Dishwasher Repair)
by dcarney01 6/4/2012 6:40:55 PM(UTC)
dishwasher will not start (Dishwasher Repair)
by BROOKSHEA 5/30/2012 6:17:17 AM(UTC)
KitchenAid Dishwasher will not start (Dishwasher Repair)
by tydlackab 3/12/2012 10:32:28 AM(UTC)
Dishwasher will not start (Dishwasher Repair)
by DDDDDD 9/29/2011 1:32:59 PM(UTC)
Dishwasher will not start. (Dishwasher Repair)
by DAWOLFESR 8/24/2011 7:38:52 AM(UTC)
Maytag Legacy Series dishwasher will not start (Dishwasher Repair)
by gideonse 8/22/2011 7:14:33 AM(UTC)
Dishwasher will not start (Dishwasher Repair)
by ta22676 5/16/2011 6:11:34 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.