2 Pages12> Go to Page...

Spin cycle starts and starts during spin cycle Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: MAV#*%%AWW REV 27	Brand: Maytag	Age: 5 - 10 years
Previous Topic Next Topic

Ale Dukes		#1 Posted : Monday, September 28, 2015 11:03:52 AM(UTC)
Rank: Member Groups: Registered Joined: 9/28/2015(UTC) Posts: 8		My washer goes into spin cycle and will start spinning and stop and then start spinning again. Clothes remain wet. It does drain.
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

sidfink43		#2 Posted : Tuesday, September 29, 2015 4:12:25 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		If you will post a model number someone may be able to help you. Also, a more detailed description of the problem, such as when does this happen would aid us. Does it do this only in spin mode or does it do this when it is filling or agitating.
User Profile View All Posts by User View Thanks

Ale Dukes		#3 Posted : Tuesday, September 29, 2015 5:19:11 AM(UTC)
Rank: Member Groups: Registered Joined: 9/28/2015(UTC) Posts: 8		MAV3855Aww Rev 27[MODEL][/MODEL]
User Profile View All Posts by User View Thanks

Ale Dukes		#4 Posted : Tuesday, September 29, 2015 6:04:56 AM(UTC)
Rank: Member Groups: Registered Joined: 9/28/2015(UTC) Posts: 8		MAV3855Aww Rev 27 This happens during spin cycle. It spins and drains, then during spin it will seem to stop and start spinning as if whatever is spinning it loses contact.
User Profile View All Posts by User View Thanks

sidfink43		#5 Posted : Tuesday, September 29, 2015 12:08:13 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		The first thing to do with these Maytag models when there is a spin problem is to change out the thrust bearing, this part here. Note the nice video. Part number: AP4009132
User Profile View All Posts by User View Thanks

Ale Dukes		#6 Posted : Tuesday, September 29, 2015 12:29:45 PM(UTC)
Rank: Member Groups: Registered Joined: 9/28/2015(UTC) Posts: 8		So, should I rule out the transmission? Everything else seems to work fine except spin cycle.
User Profile View All Posts by User View Thanks

sidfink43		#7 Posted : Tuesday, September 29, 2015 12:31:14 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		I think so, if the thrust bearing fix doesn't cure the problem the timer may be suspect.
User Profile View All Posts by User View Thanks

Ale Dukes		#8 Posted : Wednesday, October 7, 2015 6:21:45 AM(UTC)
Rank: Member Groups: Registered Joined: 9/28/2015(UTC) Posts: 8		Originally Posted by: sidfink43 I think so, if the thrust bearing fix doesn't cure the problem the timer may be suspect. Now suddenly the washer won't agitate in wash mode but I can hear the motor running and the timer ticking thru the cycle.
User Profile View All Posts by User View Thanks

sidfink43		#9 Posted : Wednesday, October 7, 2015 6:27:41 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		Well now it does sound like the transmission, although I still think the timer is a possibility. If you want to try and change it out and order the timer from this site you can return it if it does not fix the problem.
User Profile View All Posts by User View Thanks

Ale Dukes		#10 Posted : Wednesday, October 7, 2015 6:41:31 AM(UTC)
Rank: Member Groups: Registered Joined: 9/28/2015(UTC) Posts: 8		Originally Posted by: sidfink43 Well now it does sound like the transmission, although I still think the timer is a possibility. If you want to try and change it out and order the timer from this site you can return it if it does not fix the problem. It does agitate in extended rinse cycle, but is making a squeaking sound as it does. I am going to pull the thrust bearing and inspect for damage
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (2)

2 Pages12> Go to Page...