Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Dryer wont come on
Options
Go to last post Go to first unread
Model: LER7646EZ1 Brand: Whirlpool Age: More than 10 years
Previous Topic Next Topic
sagen  
#1 Posted : Sunday, December 16, 2007 8:44:56 AM(UTC)
sagen

Rank: Member

Groups: Registered
Joined: 12/15/2007(UTC)
Posts: 5
On the roor switch it clicks does that mean that the door switch is good? it not how do i check the switch? i have a green, a red and a white wire .
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
kawfeeman  
#2 Posted : Sunday, December 16, 2007 8:51:51 AM(UTC)
kawfeeman

Rank: Advanced Member

Groups: Senior Expert
Joined: 12/13/2007(UTC)
Posts: 323
easy way to check door switch ( with POWER OFF ) is to put the two wires together or "jump" switch (bypass) .. if the dryer works, the door switch was your problem... with an ohm meter put your leads on the terminals of the door switch ( hopefully with aligator clips ) and with a digital ohm meter as the switch closes, the value of the meter should come close to 1 or beep.. if it doesnt change, the switch is NG..
Back to top
misterfixall  
#3 Posted : Sunday, December 16, 2007 6:34:53 PM(UTC)
misterfixall

Rank: Advanced Member

Groups: Senior Expert
Joined: 11/7/2007(UTC)
Posts: 622
also check thermal fuse at back .white plastic with 2 connectors
Back to top
sagen  
#4 Posted : Monday, December 17, 2007 7:18:26 AM(UTC)
sagen

Rank: Member

Groups: Registered
Joined: 12/15/2007(UTC)
Posts: 5
I fount the problem the Thermal Fuse is out. I un pluged the wires put a jumper and press start dryer came on. Now i have to order that fuse.
Thanks Edell:)
Back to top
kawfeeman  
#5 Posted : Monday, December 17, 2007 7:47:26 AM(UTC)
kawfeeman

Rank: Advanced Member

Groups: Senior Expert
Joined: 12/13/2007(UTC)
Posts: 323
when you get the new thermal fuse,it will say to check cycling t-stat and venting .. either or could cause the new one to fail again...
Back to top
Users browsing this topic
Guest (3)
Similar Topics
Dryer Wont Come On (Dryer Repair)
by Alan Egbert 7/10/2009 3:33:46 AM(UTC)
Dryer wont come on (Dryer Repair)
by sagen 12/16/2007 10:29:37 AM(UTC)
Dryer wont come on (Dryer Repair)
by sagen 12/15/2007 5:22:00 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET