Rank: Advanced Member
Groups: Senior Expert
Joined: 12/13/2007(UTC) Posts: 323
|
start at the valve (you should be able to see orifice, for the bake for reference , it is brass.. ) follow the tube from the valve up to broil burner ....
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 12/13/2007(UTC) Posts: 323
|
you should be able to see tube that comes from the valve... no ?
|
|
|
|
Rank: Member
Groups: Registered
Joined: 12/15/2007(UTC) Posts: 18
|
OK found it, looks pretty cruddy. Can't see hole without removing it, looks like it unscrews if I can get a wrench on it.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 12/13/2007(UTC) Posts: 323
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 12/15/2007(UTC) Posts: 18
|
Go it off and it is dirty but open. Will soak it in some cleaner, BOO Giants lost.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 12/13/2007(UTC) Posts: 323
|
certain it is open ? ( thought for sure that it was a clogged orifice... )
|
|
|
|
Rank: Member
Groups: Registered
Joined: 12/15/2007(UTC) Posts: 18
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 12/15/2007(UTC) Posts: 18
|
A quick soak in oven cleaner and it looks like new.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 12/13/2007(UTC) Posts: 323
|
and tube from orifice to valve has no little shutoff type valves that could be off ? ( when you replaced the broil ignitor, you made certain that the wires are not pinched ... ceramic wire nuts used ? and they are tight ?
|
|
|
|
Rank: Member
Groups: Registered
Joined: 12/15/2007(UTC) Posts: 18
|
Ignitor is getting hot, wire leads came with spade connectors, OEM replacement. No independent valve for broil line.
Orifice back on and clean. Started broil and slight smell of gas at orifice. Reconnected to oven and can get gas to light at broiler with match. Small amount of gas just burns off and goes out.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close