Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

2 Pages12>
Options
Go to last post Go to first unread
gesche444  
#1 Posted : Saturday, July 26, 2014 5:44:54 AM(UTC)
gesche444

Rank: Member

Groups: Registered
Joined: 3/29/2009(UTC)
Posts: 23

See Pictures. Warm air getting into freezer. Set on "8" [9 is max setting]. First icicles form on door. Ice in Tray melts and fuses together. What I noticed: When dispensing ice, a small door in the dispenser opens to allow the ice out. When finished, the door stays open. A good place to allow warm air into freezer. I have been manually closing that door, to no avail. The insulation around the door looks OK. However, how do I check the efficiency of that?. What could be the problem?
gesche444 attached the following image(s):
door 533x800 p.jpg
inside 800x533.jpg
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
richappy  
#2 Posted : Sunday, July 27, 2014 2:19:02 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
You will need to order parts to fix the fountain door, but you also may have a leaky water valve in the back of the fridg. Look At the icemaker and see if the water to it is overflowing.
gesche444  
#3 Posted : Sunday, July 27, 2014 4:21:35 AM(UTC)
gesche444

Rank: Member

Groups: Registered
Joined: 3/29/2009(UTC)
Posts: 23

Back to normal. Freezer reads 0 degrees. You are right, the door closer is not working. We blocked the opening. Also cleaned the gasket with hot soapy water. On ordering the door part kit, it appears that the whole assembly has to be ordered. The video on replacing that assembly is for a Whilpool, not a GE Profile PSS26LGRCBB. I will check the freezer out to see if it looks anything like the Whilpool in the video. Thank you.
richappy  
#4 Posted : Sunday, July 27, 2014 5:09:45 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
I would pull up a chair and take apart the fountain housing before ordering parts. Lots of times the tab that retains the door shaft breaks on one side.
If so, I drill a hole in the plastic housing and screw in a sheet metal screw to retain it.
gesche444  
#5 Posted : Saturday, August 2, 2014 7:05:07 AM(UTC)
gesche444

Rank: Member

Groups: Registered
Joined: 3/29/2009(UTC)
Posts: 23

Have a GE side by side Model PSS26LGRCBB. Watch several videos on removing the ice dispenser assy. to get at the solenoid. I am trying the first step. One video say this is to remove the mldg around the ice dispenser. It says to push in and the tabs will release. This is not happening. Another video says that the first step is to remove the black control board [push buttons for various operations [type ice, filter, ect.]. Trying to do this the board will not come out. I really need help on this, as I do not want to break anything. Thank you.
http://www.********************...-not-working-PSS26LGRCBB
https://www.youtube.com/watch?v=...sQkr0&feature=relmfu
gesche444  
#6 Posted : Saturday, August 2, 2014 7:07:33 AM(UTC)
gesche444

Rank: Member

Groups: Registered
Joined: 3/29/2009(UTC)
Posts: 23

my link did not paste right. Here it is again.
http://www.********************...-not-working-PSS26LGRCBB
gesche444  
#7 Posted : Saturday, August 2, 2014 7:14:24 AM(UTC)
gesche444

Rank: Member

Groups: Registered
Joined: 3/29/2009(UTC)
Posts: 23

Do not know hy this is not pasting right. I will try to manually put it in.
http://www.********************...-not-working-PSS26LGRCBB
gesche444  
#8 Posted : Saturday, August 2, 2014 7:15:50 AM(UTC)
gesche444

Rank: Member

Groups: Registered
Joined: 3/29/2009(UTC)
Posts: 23

Have no idea why link does not post. will try it again without the url stuff.
************************.com/repairhelp/how-to-fix-a-refrigerator/54-3-1121572-ge-refrigerator-ice-dispenser-not-working-PSS26LGRCBB
************************.com not showing
r-e-p-a-i-r c-l-i-n-i-c-.-c-o-m not showing
richappy  
#9 Posted : Saturday, August 2, 2014 7:29:27 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
I use a putty knife to pry off the trim, usually works.
gesche444  
#10 Posted : Saturday, August 2, 2014 9:29:07 AM(UTC)
gesche444

Rank: Member

Groups: Registered
Joined: 3/29/2009(UTC)
Posts: 23

OK. The trim is off. There seems to be a white sticky tape like around the inside edge. Pulled plug from appliance. Control panel does not want to come off. It seems that there may be screws holding it in-place. If I break this, I will half to answer to my wife :( Not clear how this comes off. Help!!
Users browsing this topic
Guest (2)
Similar Topics
Frigidaire upright freezer to warm (Refrigerator & Freezer Repair)
by jrklund311 1/11/2024 2:51:18 PM(UTC)
freezer to warm and refrige, too (Refrigerator & Freezer Repair)
by Steve Gurd 12/8/2014 10:15:38 AM(UTC)
freezer to warm (Refrigerator & Freezer Repair)
by ron ump 3/30/2014 5:52:16 AM(UTC)
Freezer to warm during defrost (Refrigerator & Freezer Repair)
by zzski 2/15/2011 1:35:56 PM(UTC)
Freezer to warm (Refrigerator & Freezer Repair)
by SnoozenSusan 7/1/2010 9:57:57 AM(UTC)
Freezer to warm refer fine (Refrigerator & Freezer Repair)
by e63 2/19/2010 1:02:29 PM(UTC)
Fridge Freezer to warm (Refrigerator & Freezer Repair)
by kdbunn 8/31/2009 8:23:25 AM(UTC)
Freezer to warm (Refrigerator & Freezer Repair)
by Nblaylock 11/25/2008 9:12:59 AM(UTC)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.