Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

2 Pages<12
Options
Go to last post Go to first unread
gregaguilar  
#11 Posted : Monday, January 27, 2014 9:08:59 AM(UTC)
gregaguilar

Rank: Member

Groups: Registered
Joined: 3/11/2009(UTC)
Posts: 27

thanks joe i went and got some real thin adapters for my meter i will keep you posted
Joe / APP Team  
#12 Posted : Monday, January 27, 2014 10:40:50 AM(UTC)
Joe / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: gregaguilar Go to Quoted Post
thanks joe i went and got some real thin adapters for my meter i will keep you posted


Greg, That's even better, didn't really want you to go through the extra expense, but the "Pin Point" leads would be best.
gregaguilar  
#13 Posted : Monday, January 27, 2014 1:28:58 PM(UTC)
gregaguilar

Rank: Member

Groups: Registered
Joined: 3/11/2009(UTC)
Posts: 27

joe believe or not it was the motor that was bad even though i ohmed it out it checked good and whenm i went back to check mcu cc i turned unit on and it started into spin then it winded down with a thump and you could hear that motor no bueno that ohmeter is really not that reliable thanks joe i really appreciate your help anyway
Joe / APP Team  
#14 Posted : Tuesday, January 28, 2014 5:21:25 AM(UTC)
Joe / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: gregaguilar Go to Quoted Post
joe believe or not it was the motor that was bad even though i ohmed it out it checked good and whenm i went back to check mcu cc i turned unit on and it started into spin then it winded down with a thump and you could hear that motor no bueno that ohmeter is really not that reliable thanks joe i really appreciate your help anyway


Greg, Great job. Glad you were able to figure it out. You should be up and running soon.

Meters can be tricky, and you have to take care of them, keep them calibrated and in good working order. Again, Great job and Thanks
Users browsing this topic
Guest (2)
2 Pages<12
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.