Kenmore Washer Won't Spin, Drain Properly - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Kenmore Washer Won't Spin, Drain Properly Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 110.24642300	Brand: Kenmore	Age: 1 - 5 years
Previous Topic Next Topic

TheDude		#1 Posted : Monday, December 30, 2013 11:53:55 PM(UTC)
Rank: Member Groups: Registered Joined: 8/3/2010(UTC) Posts: 11		Takes 3-5 'spins' to get it drained and dried properly before sending it to the dryer. Spins slowly compared to how it should. Sometimes it doesn't spin at all (you have to start it by hand). Is this fixable/worth fixing? Any help is greatly appreciated.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

fairbank56		#2 Posted : Tuesday, December 31, 2013 4:55:01 AM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		Definitely worth fixing. Slow spin is usually caused by a worn clutch but can also be a worn drive block or failing motor coupler. Another possibility is something in the pump causing the motor to run slowly. You can pull the pump off the motor and try spin to rule that out. Pull the gearcase to get to the clutch. Hold clutch hub and try to rotate clutch band with your finger. Should be hard to do. Remove agitator to inspect top of drive block. Remove motor to inspect motor coupler. Whirlpool 285785 Clutch Assembly - AppliancePartsPros.com Whirlpool 389140 Washer Drive Block - AppliancePartsPros.com Whirlpool 285753A Whirlpool Direct Drive Washer Motor Coupling - AppliancePartsPros.com Eric


User Profile View All Posts by User View Thanks

TheDude		#3 Posted : Tuesday, December 31, 2013 10:14:36 PM(UTC)
Rank: Member Groups: Registered Joined: 8/3/2010(UTC) Posts: 11		Thank you so much Eric. Originally Posted by: fairbank56 Should be hard to do. Did you mean should not be hard to do?


User Profile View All Posts by User View Thanks

fairbank56		#4 Posted : Wednesday, January 1, 2014 4:13:28 AM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		No, it should be hard to rotate the clutch band within the clutch hub with just using your finger. Eric


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (4)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close