Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
brandinspector  
#1 Posted : Sunday, November 24, 2013 9:00:42 AM(UTC)
brandinspector

Rank: Member

Groups: Registered
Joined: 9/24/2010(UTC)
Posts: 9

Does anybody have any thoughts on how to repair my wife's dishwasher?

The Normal Wash red light flashes constantly and no other buttons are functional. Can't seem to figure out how to reset/reboot the thing. Was working fine prior.

Thanks.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Appliance Ninja  
#2 Posted : Sunday, November 24, 2013 10:44:39 AM(UTC)
Appliance Ninja

Rank: Member

Groups: Registered
Joined: 11/12/2013(UTC)
Posts: 957

Is the light flashing fast or slow? Can you count the number of flashes between pauses, please?
brandinspector  
#3 Posted : Sunday, November 24, 2013 10:57:33 AM(UTC)
brandinspector

Rank: Member

Groups: Registered
Joined: 9/24/2010(UTC)
Posts: 9

Originally Posted by: Appliance Ninja Go to Quoted Post
Is the light flashing fast or slow? Can you count the number of flashes between pauses, please?


The light has been flashing steady for over a month. I would call it a slow flash. If I hold the cancel button, it flashes faster.
brandinspector  
#4 Posted : Sunday, November 24, 2013 11:00:12 AM(UTC)
brandinspector

Rank: Member

Groups: Registered
Joined: 9/24/2010(UTC)
Posts: 9

Originally Posted by: brandinspector Go to Quoted Post
The light has been flashing steady for over a month. I would call it a slow flash. If I hold the cancel button, it flashes faster.


There really is no way to count pauses the way it is flashing.
Appliance Ninja  
#5 Posted : Sunday, November 24, 2013 11:07:35 AM(UTC)
Appliance Ninja

Rank: Member

Groups: Registered
Joined: 11/12/2013(UTC)
Posts: 957

It sounds like you have a faulty touch pad assembly. Let's try something. Turn the breaker off or unplug the dishwasher and use a hair dryer to heat the touch pad buttons up until very warm. Rub over each button very firmly several times as you heat them up. Does the behavior change after power is restored, any changes at all?
brandinspector  
#6 Posted : Sunday, November 24, 2013 11:29:02 AM(UTC)
brandinspector

Rank: Member

Groups: Registered
Joined: 9/24/2010(UTC)
Posts: 9

Originally Posted by: brandinspector Go to Quoted Post
There really is no way to count pauses the way it is flashing.


https://www.youtube.com/watch?v=oKh99-VNnzo
A quick video of the flashing. Can see that flashing speeds up after I hold the Cancel button.

Thank you.
Appliance Ninja  
#7 Posted : Sunday, November 24, 2013 11:36:41 AM(UTC)
Appliance Ninja

Rank: Member

Groups: Registered
Joined: 11/12/2013(UTC)
Posts: 957

I believe the touch panel is going to need to be replaced. Turn the breaker off or unplug the dishwasher and use a hair dryer to heat the touch pad buttons up until very warm. Rub over each button very firmly several times as you heat them up. Does the behavior change after power is restored, any changes at all?

The correct panel is available below.


Whirlpool W10083093 Panel-Cntl - AppliancePartsPros.com
brandinspector  
#8 Posted : Sunday, November 24, 2013 2:12:41 PM(UTC)
brandinspector

Rank: Member

Groups: Registered
Joined: 9/24/2010(UTC)
Posts: 9

Originally Posted by: Appliance Ninja Go to Quoted Post
I believe the touch panel is going to need to be replaced. Turn the breaker off or unplug the dishwasher and use a hair dryer to heat the touch pad buttons up until very warm. Rub over each button very firmly several times as you heat them up. Does the behavior change after power is restored, any changes at all?

The correct panel is available below.


Whirlpool W10083093 Panel-Cntl - AppliancePartsPros.com



https://www.youtube.com/watch?v=q2Qj8XOPdr4

A video of what I saw after powering back on.

When powered back up after heating buttons, Machine started running for about 3 minutes. The Cancel light was lit up in addition to the flashing normal wash light that I started with.

I killed the power again after it quit to see what would happen upon restart and the flashing normal wash was the only one that came back on.

Still thinking the same thing?
Appliance Ninja  
#9 Posted : Sunday, November 24, 2013 2:21:30 PM(UTC)
Appliance Ninja

Rank: Member

Groups: Registered
Joined: 11/12/2013(UTC)
Posts: 957

Yes, your touch panel is bad and will need to be replaced.
brandinspector  
#10 Posted : Sunday, December 8, 2013 7:56:37 PM(UTC)
brandinspector

Rank: Member

Groups: Registered
Joined: 9/24/2010(UTC)
Posts: 9

Thanks for the info. Part received quickly and the problem was fixed when installed!
Users browsing this topic
Guest (2)
Similar Topics
Kenmore ULTRA Wash 665.13229N411 stopped washing (Dishwasher Repair)
by jrfk2 3/22/2019 7:10:57 AM(UTC)
kenmore ultra wash quiet guard 3 with very little water pressure (Dishwasher Repair)
by spideym68 1/21/2016 10:49:15 AM(UTC)
Does Kenmore ultra wash 2008 dry dishes? (Dishwasher Repair)
by Laura123456 4/25/2015 10:08:23 PM(UTC)
kenmore ultra wash no fill (Dishwasher Repair)
by rmac61 8/23/2014 9:51:30 AM(UTC)
Kenmore Ultra Wash Quiet Guard (Dishwasher Repair)
by robballa 12/12/2013 3:04:45 PM(UTC)
Kenmore Ultra Wash Dishwasher Door (Dishwasher Repair)
by 7cs777 7/29/2013 10:48:09 AM(UTC)
Kenmore Ultra Wash. No lights dead (Dishwasher Repair)
by Davesnothere 7/4/2013 7:10:18 PM(UTC)
Kenmore Ultra Wash, ran for very long time, when opened extremely hot and dry (Dishwasher Repair)
by jimhokie 5/23/2013 5:31:45 PM(UTC)
Kenmore Ultra Wash Motor Replacement - need Serivce manual (Dishwasher Repair)
by GlennFord 4/14/2013 1:03:22 PM(UTC)
Kenmore Ultra Wash dripping (Dishwasher Repair)
by Parodox 7/16/2012 10:24:51 AM(UTC)
Kenmore Ultra Wash Doesn't Drain Complete at End of Cycle (Dishwasher Repair)
by Eric1974 6/8/2012 1:37:59 PM(UTC)
Kenmore Ultra Wash Dishwasher Model 665.1737 (Dishwasher Repair)
by Scmore 3/11/2012 11:34:44 AM(UTC)
Kenmore Ultra Wash/Whirlpool (Dishwasher Repair)
by ryap7az 1/4/2012 1:14:01 PM(UTC)
Kenmore Ultra Wash Not Draining (Dishwasher Repair)
by jsnider608 11/29/2011 6:54:26 AM(UTC)
Kenmore Ultra Wash - No lights (Dishwasher Repair)
by jim.nabber.va@gmail.com 8/17/2011 10:56:59 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.