2 Pages12> Go to Page...

connector replacement Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: 66517474300	Brand: Kenmore	Age: 5 - 10 years
Previous Topic Next Topic

pilot1		#1 Posted : Wednesday, November 13, 2013 8:47:20 AM(UTC)
Rank: Member Groups: Registered Joined: 11/13/2013(UTC) Posts: 8		One of the pins from the control board connector (5 wire) is broken off and stuck in the connector. Is there a way to change out the connector or is a whole new wire harness required? JK
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Appliance Ninja		#2 Posted : Wednesday, November 13, 2013 9:56:39 AM(UTC)
Rank: Member Groups: Registered Joined: 11/12/2013(UTC) Posts: 957		Is the broken connector part of the harness or part of the control board? Is the connector labeled on the board, like CON1 or CON2, P2, etc?
User Profile View All Posts by User View Thanks

pilot1		#3 Posted : Wednesday, November 13, 2013 10:38:36 AM(UTC)
Rank: Member Groups: Registered Joined: 11/13/2013(UTC) Posts: 8		The broken pin is from the control panel but broke off in the connector socket. I have a new control panel but need to get the broken pin out of the connector/and or replace wire end in connector. JK
User Profile View All Posts by User View Thanks

Appliance Ninja		#4 Posted : Wednesday, November 13, 2013 10:45:09 AM(UTC)
Rank: Member Groups: Registered Joined: 11/12/2013(UTC) Posts: 957		Okay, so you should be able to use a needle nose plier to grab the spade terminal that is stuck in the female connector and simply pull it out.
User Profile View All Posts by User View Thanks

pilot1		#5 Posted : Wednesday, November 13, 2013 10:46:35 AM(UTC)
Rank: Member Groups: Registered Joined: 11/13/2013(UTC) Posts: 8		It is the P 2 connector on the board. JK
User Profile View All Posts by User View Thanks

pilot1		#6 Posted : Wednesday, November 13, 2013 10:48:21 AM(UTC)
Rank: Member Groups: Registered Joined: 11/13/2013(UTC) Posts: 8		Thanks. I'll try that approach. If the female connector is damaged can it be replaced?
User Profile View All Posts by User View Thanks

pilot1		#7 Posted : Wednesday, November 13, 2013 10:52:37 AM(UTC)
Rank: Member Groups: Registered Joined: 11/13/2013(UTC) Posts: 8		Originally Posted by: pilot1 Thanks. I'll try that approach. If the female connector is damaged can it be replaced? Also, if I were to replace the connector, where can I find a replacement? I don't see the P2 connector listed as a part for this machine. Thanks JK
User Profile View All Posts by User View Thanks

Appliance Ninja		#8 Posted : Wednesday, November 13, 2013 11:05:49 AM(UTC)
Rank: Member Groups: Registered Joined: 11/12/2013(UTC) Posts: 957		The connector by itself is not available, you would need to replace the harness. Is it one of the small pin connectors or one of the larger 1/4" spade connectors?
User Profile View All Posts by User View Thanks

pilot1		#9 Posted : Wednesday, November 13, 2013 11:12:30 AM(UTC)
Rank: Member Groups: Registered Joined: 11/13/2013(UTC) Posts: 8		Originally Posted by: Appliance Ninja The connector by itself is not available, you would need to replace the harness. Is it one of the small pin connectors or one of the larger 1/4" spade connectors? It is one of the small pin connectors
User Profile View All Posts by User View Thanks

Appliance Ninja		#10 Posted : Wednesday, November 13, 2013 11:23:52 AM(UTC)
Rank: Member Groups: Registered Joined: 11/12/2013(UTC) Posts: 957		Okay, if you cannot get the old pin out, the harness will indeed need to be replaced.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest

2 Pages12> Go to Page...