Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
jshoe01  
#1 Posted : Wednesday, September 5, 2007 5:56:15 PM(UTC)
jshoe01

Rank: Member

Groups: Registered
Joined: 9/5/2007(UTC)
Posts: 4

The dishwasher runs and never drains (even when I manually cancel/drain). I removed the control module and found a significant burn thru the board near a solenoid?
My question are :
Should I just replace the control module and not worry about it?
Is this a common failure ?
Should I dig deeper to find what caused it ?
If more troubleshooting is required what and how (please)?

Thanks
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Wednesday, September 5, 2007 9:15:43 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi jshoe01

At this time I would just replace the control board.
This is not a common failure for the Bosch dishwasher.
I would check the resistance though the drain motor terminals. It suppose to be about 16 Ohms.

- Here are the complete troubleshooting instructions for the Bosch dishwasher Model SHU5306 UC/12 (FD 8003-)

- The part number for the new control board AP2802870

Also I would recommend you to check all replies posted by our Bosch guru "loadster".

Good luck.
Gene.
jshoe01  
#3 Posted : Thursday, September 6, 2007 9:27:08 AM(UTC)
jshoe01

Rank: Member

Groups: Registered
Joined: 9/5/2007(UTC)
Posts: 4

Thanks Gene,

*If* the drain pump is bad, could that cause the solenoid to fry ?
vanhuffel  
#4 Posted : Tuesday, April 28, 2009 4:40:44 PM(UTC)
vanhuffel

Rank: Member

Groups: Registered
Joined: 4/28/2009(UTC)
Posts: 2

Originally Posted by: Gene Go to Quoted Post
Hi jshoe01

At this time I would just replace the control board.
This is not a common failure for the Bosch dishwasher.
I would check the resistance though the drain motor terminals. It suppose to be about 16 Ohms.

- Here are the complete troubleshooting instructions for the Bosch dishwasher Model SHU5306 UC/12 (FD 8003-)

- The part number for the new control board AP2802870

Also I would recommend you to check all replies posted by our Bosch guru "loadster".

Good luck.
Gene.


Perhaps this is not common, however, I have the same symptoms; cycle will not end, but only will drain on cancel-- I have a burned-through pin on the PCB also. On one of the relays. Tried filling with solder, no joy...
Gene  
#5 Posted : Wednesday, April 29, 2009 5:02:14 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
In such situation the correction is to replace the control module. If you need the correct part number then post the complete model number of the dishwasher.

Gene.
vanhuffel  
#6 Posted : Wednesday, April 29, 2009 5:19:20 PM(UTC)
vanhuffel

Rank: Member

Groups: Registered
Joined: 4/28/2009(UTC)
Posts: 2

I called the toll free number and gave them the model number--it's not one of the covered models in the recall--however they are covering the parts. Thanks
Users browsing this topic
Guest (2)
Similar Topics
Bosch dishwasher won't drain, begins cycle, then stops - FIXED (Dishwasher Repair)
by mabradbury 1/17/2019 7:08:25 PM(UTC)
Bosch dishwasher won't drain completely (Dishwasher Repair)
by nathaniel.hoffman@gmail.com 12/25/2018 6:30:47 AM(UTC)
Bosch Dishwasher won't drain and goes directly to "Clean" Light (Dishwasher Repair)
by ed3120 6/4/2016 4:40:01 AM(UTC)
Bosch Dishwasher won't Drain (Dishwasher Repair)
by coachbrady 7/12/2010 6:28:40 PM(UTC)
Bosch dishwasher won't drain (Dishwasher Repair)
by Debbc 4/25/2009 8:25:42 AM(UTC)
Bosch dishwasher won't drain (Dishwasher Repair)
by frennings 12/23/2008 2:37:08 PM(UTC)
Bosch dishwasher won't drain after installing new garbage disposal (Dishwasher Repair)
by madden611 11/25/2008 4:05:12 PM(UTC)
Bosch dishwasher won't drain, power surge problems? (Dishwasher Repair)
by vcalkins 8/16/2008 8:41:02 AM(UTC)
Bosch dishwasher won't drain (Dishwasher Repair)
by downtube 7/1/2008 4:29:01 PM(UTC)
Bosch Dishwasher won't drain (Dishwasher Repair)
by Little Lost one 6/12/2008 11:30:14 AM(UTC)
Bosch Dishwasher won't drain (Dishwasher Repair)
by reisman 12/24/2007 7:31:35 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.