Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
it wont heat
Options
Go to last post Go to first unread
Model: 11063932102 Brand: Kenmore Age: 5 - 10 years
Previous Topic Next Topic
mani  
#1 Posted : Tuesday, April 28, 2009 7:38:36 PM(UTC)
mani

Rank: Member

Groups: Registered
Joined: 4/28/2009(UTC)
Posts: 31
dryer wont heat,check all the themostate and thermel cut off and also thermel fuse.it tumble but it did not heat,i diagnosed the 110 which come from motor is coming but other 110 is missing which come from some where control system,what could be wrong
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Wednesday, April 29, 2009 3:27:43 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here is the tech sheet
https://www.servicematters.com/d...0Sheet%20-%203980052.pdf


i diagnosed the 110 which come from motor is coming but other 110 is missing which come from some where control system,what could be wrong

Check that you have the proper power at the plug.
L1 to Neutral and L2 to Neutral should be 120 volts
Also L1 to L2 should be 240 volts.
It is not uncommon to loose half the line without actually tripping the breaker.
Depending on which side drops out the unit will run but not heat.
Flip the breaker off/on slowly a couple times.

Be careful, 240 volts is lethal.
THIS FORUM IS DEAD!!!!!!!
Back to top
mani  
#3 Posted : Wednesday, April 29, 2009 4:00:18 AM(UTC)
mani

Rank: Member

Groups: Registered
Joined: 4/28/2009(UTC)
Posts: 31
thank u for your response,there is no problem with power ,L1 and L2 already giving me 240
Back to top
denman  
#4 Posted : Wednesday, April 29, 2009 4:13:32 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
dryer wont heat,check all the themostate and thermel cut off and also thermel fuse
Is the heater itself OK?

Looks like the heater relay and the motor relay are the same.
Check this just to be sure.
If they are the same, swap them
Now if it will not start you know the relay is shot.
THIS FORUM IS DEAD!!!!!!!
Back to top
mani  
#5 Posted : Wednesday, April 29, 2009 4:17:39 AM(UTC)
mani

Rank: Member

Groups: Registered
Joined: 4/28/2009(UTC)
Posts: 31
yes i am thinking aswell this could be the heater relay but not a control board which is beside the relay? thank you for your quick response
Back to top
denman  
#6 Posted : Wednesday, April 29, 2009 5:27:38 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Could be the control board but you want to eliminate everything else before coming to that conclusion as it is the most expensive part.
THIS FORUM IS DEAD!!!!!!!
Back to top
Users browsing this topic
Guest (3)
Similar Topics
Whirlpool built in micro/oven combo unit wont heat after self clean - thermal fuse ok (Oven Repair (including Ranges and Cooktops))
by parangil 2/7/2015 11:14:22 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET