Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Hot And Cold Ok But Warm/warm And Cold/cold/ Not Working
Options
Go to last post Go to first unread
Model: ATW4475VQO Brand: Admiral Age: 5 - 10 years
Previous Topic Next Topic
maxy212  
#1 Posted : Wednesday, September 25, 2013 5:24:00 PM(UTC)
maxy212

Rank: Member

Groups: Registered
Joined: 9/25/2013(UTC)
Posts: 9
COLD/COLD AND HOT/HOT FILL THE TUB, BUT WHEN PUT ON WARM/WARM AND COLD/COLD WILL NOT FILL. AND RINSE WILL NOT FILL AT ALL.:confused:
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
fairbank56  
#2 Posted : Wednesday, September 25, 2013 6:08:49 PM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Your statements are contradictory. There is no HOT/HOT or WARM/WARM. Rinse is cold only. You say COLD/COLD fills and then say COLD/COLD does not fill. There are two COLD/COLD settings on this washer, one ATC and one non-ATC. Check your cold water supply and make sure screens in fill hose and/or water inlet valve is/are clear of debris.

Eric
Back to top
maxy212  
#3 Posted : Wednesday, September 25, 2013 7:02:19 PM(UTC)
maxy212

Rank: Member

Groups: Registered
Joined: 9/25/2013(UTC)
Posts: 9
Originally Posted by: fairbank56 Go to Quoted Post
Your statements are contradictory. There is no HOT/HOT or WARM/WARM. Rinse is cold only. You say COLD/COLD fills and then say COLD/COLD does not fill. There are two COLD/COLD settings on this washer, one ATC and one non-ATC. Check your cold water supply and make sure screens in fill hose and/or water inlet valve is/are clear of debris.

Eric

On wash the setting for water temperature say warm/warm, hot/hot, cold/cold/ warm/warm these are for wash and rinse. the water fills on warm and hot but won't fill on warm or cold settings and water will not fill on rinse at all. These are the setting showing on the panel of my washing machine, don't know what you are saying. BUT THESE ARE WHAT IS SHOWING ON MY WASHING MACHINE.
Back to top
fairbank56  
#4 Posted : Wednesday, September 25, 2013 7:37:44 PM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Then I'd like to see a photo of your control panel because I have the tech sheet for your washer and a photo of a control panel from that model number washer and both show cold/cold, cool/cold, warm/cold and hot/cold temperature settings. Maybe you have an international version of this washer but I would think the model number would be different. Are you in the U.S.? This is an 09 model and there aren't any models of that year in the U.S. that use anything other than a cold rinse, due to government regulations. Did you make the check that I suggested?

Eric
Back to top
maxy212  
#5 Posted : Wednesday, September 25, 2013 8:12:26 PM(UTC)
maxy212

Rank: Member

Groups: Registered
Joined: 9/25/2013(UTC)
Posts: 9
Originally Posted by: fairbank56 Go to Quoted Post
Your statements are contradictory. There is no HOT/HOT or WARM/WARM. Rinse is cold only. You say COLD/COLD fills and then say COLD/COLD does not fill. There are two COLD/COLD settings on this washer, one ATC and one non-ATC. Check your cold water supply and make sure screens in fill hose and/or water inlet valve is/are clear of debris.

Eric

I am saying when put on wash this problem exists. And rinse will not fill at all
Back to top
fairbank56  
#6 Posted : Thursday, September 26, 2013 4:47:19 AM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
If you won't give me any feedback on my questions and suggestions, I can't help you.

Eric
Back to top
maxy212  
#7 Posted : Thursday, September 26, 2013 7:50:49 AM(UTC)
maxy212

Rank: Member

Groups: Registered
Joined: 9/25/2013(UTC)
Posts: 9
Originally Posted by: fairbank56 Go to Quoted Post
Then I'd like to see a photo of your control panel because I have the tech sheet for your washer and a photo of a control panel from that model number washer and both show cold/cold, cool/cold, warm/cold and hot/cold temperature settings. Maybe you have an international version of this washer but I would think the model number would be different. Are you in the U.S.? This is an 09 model and there aren't any models of that year in the U.S. that use anything other than a cold rinse, due to government regulations. Did you make the check that I suggested?

Eric


thanks for your help, I guess I didn't make myself clear, the different temps are on the wash cycle. and only the hot and cold fill, the other temps don't fill and the rise doesn't fill either. Guess I went into to much detail in my first post.
Back to top
fairbank56  
#8 Posted : Thursday, September 26, 2013 8:18:39 AM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
There's cold, cool, warm and hot on the wash cycle. Only cold on the rinse cycle, unless you have some non-US version of this washer. If your saying hot wash will fill and cold wash will fill but warm and cool will not (no water coming in at all), then I'd say you have a faulty ATC (temp) switch. No cold water at all in any rinse cycle could be the ATC or a faulty timer. I don't have much confidence in your symptoms based on the way you are describing them so I really can't say for sure. Troubleshooting this problem with multimeter and wiring diagram will quickly pinpoint the problem but if you have no experience in that area, you are left with parts swapping to locate the problem. If you buy the parts from APP, you may return them if they don't solve the problem.

Whirlpool W10184148 Atc Switch Mid Level - AppliancePartsPros.com

Whirlpool W10199989 Timer - AppliancePartsPros.com

Eric
Back to top
maxy212  
#9 Posted : Thursday, September 26, 2013 9:13:26 AM(UTC)
maxy212

Rank: Member

Groups: Registered
Joined: 9/25/2013(UTC)
Posts: 9
We were sent a defective switch, thanks we don't need any more responses, we have the problem fixed. Thanks everyone.
Back to top
maxy212  
#10 Posted : Wednesday, October 2, 2013 3:05:54 PM(UTC)
maxy212

Rank: Member

Groups: Registered
Joined: 9/25/2013(UTC)
Posts: 9
Originally Posted by: fairbank56 Go to Quoted Post
Your statements are contradictory. There is no HOT/HOT or WARM/WARM. Rinse is cold only. You say COLD/COLD fills and then say COLD/COLD does not fill. There are two COLD/COLD settings on this washer, one ATC and one non-ATC. Check your cold water supply and make sure screens in fill hose and/or water inlet valve is/are clear of debris.

Eric

we replace the temp switch and thought that was the problem, it did solve part of it but still won't fill in rinse cycle.
Back to top
Users browsing this topic
Guest (7)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET