Dish washer no lights on panel stopped mid cycle - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Dish washer no lights on panel stopped mid cycle Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: DU1055XTSD3	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

56Gomer		#1 Posted : Sunday, August 18, 2013 6:34:28 AM(UTC)
Rank: Member Groups: Registered Joined: 8/11/2013(UTC) Posts: 2		The dish washer stopped mid cycle. No lights on front panel. Thermal ohm checks good, both door switches good. Have 115v power to board. Looking for schematic.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

HumboldtRepairMan		#2 Posted : Sunday, August 18, 2013 3:52:58 PM(UTC)
Rank: Member Groups: Registered Joined: 7/16/2013(UTC) Posts: 916		Check behind bottom panel or main panel for tech sheet. Ohm test the float switch also if that isn't it and you said the therm fuse is good and both door switches...........if you have 120v at the main board and you didn't have any keypad issues before this happend i'd suspect the main board is bad. Here's your parts Control Panel parts for Whirlpool DU1055XTSD3 - AppliancePartsPros.com


User Profile View All Posts by User View Thanks

56Gomer		#3 Posted : Sunday, August 25, 2013 7:02:05 PM(UTC)
Rank: Member Groups: Registered Joined: 8/11/2013(UTC) Posts: 2		Originally Posted by: HumboldtRepairMan Check behind bottom panel or main panel for tech sheet. Ohm test the float switch also if that isn't it and you said the therm fuse is good and both door switches...........if you have 120v at the main board and you didn't have any keypad issues before this happend i'd suspect the main board is bad. Here's your parts Control Panel parts for Whirlpool DU1055XTSD3 - AppliancePartsPros.com Replaced the board, all is good. Thanks:)


User Profile View All Posts by User View Thanks

HumboldtRepairMan		#4 Posted : Sunday, August 25, 2013 7:24:26 PM(UTC)
Rank: Member Groups: Registered Joined: 7/16/2013(UTC) Posts: 916		You're very welcome


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close