Dryer help???? Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
	Brand: Kenmore	Age: 5 - 10 years
Previous Topic Next Topic

Chrisbot		#1 Posted : Thursday, May 16, 2013 4:34:39 PM(UTC)
Rank: Member Groups: Registered Joined: 5/16/2013(UTC) Posts: 4		I have a Kenmore Elite Smartheat Quitepak9 gas dryer. It will only work if I keep switching from pushing the start button to pause button and so on. Eventually it will start but only runs for a bit then I have to repeat the whole process. I order a thermal fuse but did not work. PLEASE HELP
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Simon / APP Team		#2 Posted : Thursday, May 16, 2013 7:37:23 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hello. Please, provide the complete model number of the dryer. Simon.
User Profile View All Posts by User View Thanks

Chrisbot		#3 Posted : Friday, May 17, 2013 4:29:15 PM(UTC)
Rank: Member Groups: Registered Joined: 5/16/2013(UTC) Posts: 4		The Model number is 110.95862401 The Serial number is MS2201031
User Profile View All Posts by User View Thanks

Chrisbot		#4 Posted : Saturday, May 18, 2013 2:22:22 PM(UTC)
Rank: Member Groups: Registered Joined: 5/16/2013(UTC) Posts: 4		ran diagnostics no errors. Ran test for moisture sensor and it failed. Took apart the sensors and cleaned them up and now it passes. Any other ideas anybody. Thermistor test passed as well.
User Profile View All Posts by User View Thanks

Simon / APP Team		#5 Posted : Monday, May 20, 2013 9:35:46 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hello. Most likely the problem is with main control board Part number: 8546219 Remove it and check the solderind at the back. Possibly one of the relay's contacts needs a drop of solder. If not then try to replace the control board. Post ther results. Simon. P.S. You can return the part if it's not going to fix the problem.
User Profile View All Posts by User View Thanks

Chrisbot		#6 Posted : Tuesday, May 21, 2013 3:41:12 PM(UTC)
Rank: Member Groups: Registered Joined: 5/16/2013(UTC) Posts: 4		Ok I will take a look at the board thank you for the advice.
User Profile View All Posts by User View Thanks

Simon / APP Team		#7 Posted : Tuesday, May 21, 2013 4:12:10 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		You are welcome.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (3)