Rank: Member
Groups: Registered
Joined: 9/2/2012(UTC)
Posts: 4
|
My GE fridge has been making a clicking sound for about a month. I notice the fan in the freezer will start and stop when it clicks until it will finally come on. The water/ice dispenser is also not working and when you hit it the lights on front will go out.
It has been working on and off but then last night it started making rapid clicking sounds and now it is silent will not cool in the fridge or freezer at all.
Looking through the forums I am trying to figure out if it just sounds like the motherboard or if the compressor might also be bad. Thanks for any help.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/2/2012(UTC)
Posts: 4
|
I know I made a mistake and did a double post but does nobody have any answers for my problems here?
|
|
|
|
|
|
Rank: Advanced Member
Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
|
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/2/2012(UTC)
Posts: 4
|
Got the part and took maybe 10 mins to install it. Now everything works great! Even my water dispenser that had stopped working before the rest of the fridge is now dispensing again.
Thanks for the help.:)
|
|
|
|
|
|
Rank: Advanced Member
Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
|
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/6/2008(UTC)
Posts: 4
|
I replaced the board, actually twice, and it never gets cool. And there is clicking!
Any suggestions?
PLEASE
|
|
|
|
|
|
Rank: Advanced Member
Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
|
Hi.
Please provide the model number and more detailed describtion of the problem.
Also, if you don't mind the part number of the board you replaced.
Simon.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/6/2008(UTC)
Posts: 4
|
Originally Posted by: Simon / APP Team  Hi.
Please provide the model number and more detailed describtion of the problem.
Also, if you don't mind the part number of the board you replaced.
Simon. Model # PFS22S1SBSS Serial #THO42739 Board WR55X10942 Compressor wont start! AMP at relay goes to8.1
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/6/2008(UTC)
Posts: 4
|
|
|
|
|
|
|
Rank: Advanced Member
Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
|
Hello. Check the continuity between three compressor's contacts and from one of them to the ground. If you read the resistance between the contacts and no continuity to the ground you may need to replace the start components Part number: WR07X10097
If that doesn't help - you have a bad compressor. Remember that the parts purchased from APP can be returned back even if you installed them. Good luck. Post the results. Simon.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
