Leak from motor area - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Leak from motor area Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GSD4030Z05WW	Brand: GE	Age: 5 - 10 years
Previous Topic Next Topic

esmyth		#1 Posted : Thursday, December 6, 2007 5:22:59 AM(UTC)
Rank: Member Groups: Registered Joined: 12/6/2007(UTC) Posts: 4		Found a large puddle in front of the machine and removed kick plates etc to check under machine. Ran rince cycle to check it and discovered dripping from around where the pump flange(?) meets tub. Is this a simple fix? The machine is included in the GE recall.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Thursday, December 6, 2007 3:06:28 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Most likely the problem is a broken seal inside the pump. There are two ways to fix it. (1) You can buy the impeller & seal kit and repair the old pump (it comes with the installation instructions) or (2) You can replace the pump & motor assembly. In both cases the dishwasher has to be removed from the cabinet. - The part number for the impeller & seal kit AP631386 - The part number for the pump & motor assembly AP2616850 - Here are the break down diagrams for the GE dishwasher Model GSD4030Z05WW Gene.


User Profile View All Posts by User View Thanks

esmyth		#3 Posted : Thursday, December 6, 2007 5:27:39 PM(UTC)
Rank: Member Groups: Registered Joined: 12/6/2007(UTC) Posts: 4		It looks like it's dribbling down from around the pump connect AP203942. any quick way to check this?


User Profile View All Posts by User View Thanks

Gene		#4 Posted : Thursday, December 6, 2007 5:40:02 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: esmyth It looks like it's dribbling down from around the pump connect AP203942. any quick way to check this? This number is incorrect. Gene.


User Profile View All Posts by User View Thanks

esmyth		#5 Posted : Friday, December 7, 2007 3:36:20 AM(UTC)
Rank: Member Groups: Registered Joined: 12/6/2007(UTC) Posts: 4		you are coorrect. The number I was looking at was AP2039426 or AP2039418. I'm going to look at the spray arm


User Profile View All Posts by User View Thanks

esmyth		#6 Posted : Friday, December 7, 2007 5:07:52 AM(UTC)
Rank: Member Groups: Registered Joined: 12/6/2007(UTC) Posts: 4		I dropped the motor and the pump connect has a hole in it. Looks like it was punctured from a sharp straw!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (5)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close