Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages12>
GE Washer will not start
Options
Go to last post Go to first unread
Model: WPRE6100G0WT Brand: GE Age: 1 - 5 years
Previous Topic Next Topic
neco187  
#1 Posted : Saturday, January 12, 2013 6:40:54 PM(UTC)
neco187

Rank: Member

Groups: Registered
Joined: 6/1/2011(UTC)
Posts: 9
My washer won't start. I hit the button and nothing.
When I change the load selector the cycle times change.
Please help
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
fairbank56  
#2 Posted : Sunday, January 13, 2013 6:22:58 AM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Check the water level pressure switch behind the control panel. This is a normally closed switch. You should have continuity across the two terminals with the wires removed.

Eric
Back to top
neco187  
#3 Posted : Sunday, January 13, 2013 8:16:11 AM(UTC)
neco187

Rank: Member

Groups: Registered
Joined: 6/1/2011(UTC)
Posts: 9
I'll try that.what if there is, then what?
Back to top
fairbank56  
#4 Posted : Sunday, January 13, 2013 9:19:58 AM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
I am assuming that when you say your washer will not start, that it does not fill. Is this correct?

Eric
Back to top
neco187  
#5 Posted : Sunday, January 13, 2013 10:03:35 AM(UTC)
neco187

Rank: Member

Groups: Registered
Joined: 6/1/2011(UTC)
Posts: 9
Yes sir. I hit the start button, nothing. If I change cycles the time changes but nothing else.
Back to top
fairbank56  
#6 Posted : Sunday, January 13, 2013 10:35:46 AM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Try a reset by unplugging the washer for 2 minutes. When you plug it back in, does the display come on right away or do you have to press the start button for it to come on?

Try going into service mode by pressing and holding the start button and rotate the cycle selector 180 degrees (8 clicks). Release start button and display should show 88 and all 3 LED indicators should be on. Rotate 2 clicks to the right to check for error codes. Error codes are indicated by any of the 3 LED indicators being on. If on, note which ones. Rotate one more click to the right to check for further error codes and note them. Each successive click after that will activate the hot water valve, cold water valve, slow agitate, fast agitate, pump, and spin. To exit service mode, press/hold start button and rotate cycle knob 180 degrees, release start button.

Eric
Back to top
neco187  
#7 Posted : Sunday, January 13, 2013 10:54:33 AM(UTC)
neco187

Rank: Member

Groups: Registered
Joined: 6/1/2011(UTC)
Posts: 9
When I hit the start button nothing happens. The display doesn't turn on til I change the cycles
Back to top
neco187  
#8 Posted : Sunday, January 13, 2013 11:07:55 AM(UTC)
neco187

Rank: Member

Groups: Registered
Joined: 6/1/2011(UTC)
Posts: 9
I can't get into service mode. Is it possible the start button took a shit and the board is bad
Back to top
fairbank56  
#9 Posted : Sunday, January 13, 2013 12:27:14 PM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
That's what it looks like. If you get the board from here and it doesn't fix the problem, you can return it.

Eric
Back to top
neco187  
#10 Posted : Sunday, January 13, 2013 12:58:04 PM(UTC)
neco187

Rank: Member

Groups: Registered
Joined: 6/1/2011(UTC)
Posts: 9
I had continuity on the switch. I had to wait for a meter.
I also have no blinking light on top of the motor. I took off panel to look for it and I don't even see a light.
Back to top
Users browsing this topic
Guest (3)
Similar Topics
GE Washer will not start (Washer Repair)
by Seapro210 5/5/2009 4:33:24 PM(UTC)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET