Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Washer Stops Between Cycles
Options
Go to last post Go to first unread
Model: MLG2000AWWW Brand: Maytag Age: 5 - 10 years
Previous Topic Next Topic
polishplumber  
#1 Posted : Thursday, December 27, 2012 4:05:28 PM(UTC)
polishplumber

Rank: Member

Groups: Registered
Joined: 4/13/2010(UTC)
Posts: 6
Hi. I Have A Stackable Maytag Unit. The Washer Stops After The Rinse Cycles. Im Assuming It Might Be The Control Panel. As Well The Bleach And Softener Dispensers Fill With Water And Dont Drain. Any Help Will Be Greatly Appreciated. Thank You
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Simon / APP Team  
#2 Posted : Thursday, December 27, 2012 4:49:46 PM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Hi.

Does it drain the water out?
Does the door locks?

Simon.
Back to top
polishplumber  
#3 Posted : Thursday, December 27, 2012 5:06:06 PM(UTC)
polishplumber

Rank: Member

Groups: Registered
Joined: 4/13/2010(UTC)
Posts: 6
Originally Posted by: polishplumber Go to Quoted Post
Hi. I Have A Stackable Maytag Unit. The Washer Stops After The Rinse Cycles. Im Assuming It Might Be The Control Panel. As Well The Bleach And Softener Dispensers Fill With Water And Dont Drain. Any Help Will Be Greatly Appreciated. Thank You

THANKS FOR THE QUICK REPLY. THE TUB STAYS FULL AND THE DOOR IS LOCKED WITH THE ON AND THE DOOR LOCK LIGHTS ON.
Back to top
Simon / APP Team  
#4 Posted : Thursday, December 27, 2012 5:33:32 PM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Hi.
You need to check the drain pump, drain hoses.
If the pump is getting 120VAC but is not draining and there is no restriction in the drain line - replace the pump.

Here are the breakdown diagrams and 01-Base (washer) parts for Maytag MLG2000AWW - AppliancePartsPros.com

Simon.
Back to top
polishplumber  
#5 Posted : Thursday, December 27, 2012 6:08:16 PM(UTC)
polishplumber

Rank: Member

Groups: Registered
Joined: 4/13/2010(UTC)
Posts: 6
Originally Posted by: polishplumber Go to Quoted Post
THANKS FOR THE QUICK REPLY. THE TUB STAYS FULL AND THE DOOR IS LOCKED WITH THE ON AND THE DOOR LOCK LIGHTS ON.

HI SIMON. AFTER THE UNIT SHUTS DOWN AND I PUSH THE START BUTTON IT DOES DRAIN AND GOES TO THE NEXT RINSE CYCLE AND THE STOPS AGAIN. IF I TURN THE KNOB TO RINSE 3 IT WILL CYCLE OUT AND PUMP OUT AND SPIN AND SHUT DOWN IN PROPER MODE. DOES THAT SAY ANYTHING. THANKS AGAIN, MUNISH.
Back to top
Simon / APP Team  
#6 Posted : Friday, December 28, 2012 10:46:23 AM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Hi.

If you chose the cold water wash will it fill up?

Simon
Back to top
polishplumber  
#7 Posted : Friday, December 28, 2012 3:17:13 PM(UTC)
polishplumber

Rank: Member

Groups: Registered
Joined: 4/13/2010(UTC)
Posts: 6
Originally Posted by: Simon / APP Team Go to Quoted Post
Hi.
You need to check the drain pump, drain hoses.
If the pump is getting 120VAC but is not draining and there is no restriction in the drain line - replace the pump.

Here are the breakdown diagrams and 01-Base (washer) parts for Maytag MLG2000AWW - AppliancePartsPros.com

Simon.

HI SIMON, I JUST TRIED IT. YES IT DOES FILL ON THE COLD SETTING
Back to top
polishplumber  
#8 Posted : Saturday, January 5, 2013 9:42:57 AM(UTC)
polishplumber

Rank: Member

Groups: Registered
Joined: 4/13/2010(UTC)
Posts: 6
:)
Originally Posted by: polishplumber Go to Quoted Post
HI SIMON, I JUST TRIED IT. YES IT DOES FILL ON THE COLD SETTING

HI.SIMON. GREAT NEWS.I TOOKYOUR ADVICE. I TOOKTHE HOT AND COLD WATER SUPPLIES OFF AT THE BACK OF THE WASHER. THE HOT SIDE WAS CLEAR. I TOOKTHE COLD OFF AND NEARLY FELL ON THE FLOOR.IT WAS COMPLETELY BLOCKED OFF WITH THIS BROWN MUCK SLINE CALCIUM OR WHAT EVER. I CLEANED THE PORT AND CYCLED THE MACHINE. IT RUNS PERFECTLY. LIKE NEW. YOU DID IT AGAIN. I THANK YOU VERY MUCH, I OWE YOU A BEER!!!!!!!!! HAVE A GREAT NEW YEAR!!!!:)
Back to top
Simon / APP Team  
#9 Posted : Saturday, January 5, 2013 9:49:15 AM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
You are very welcome.

Simon.
Back to top
kwinky2003  
#10 Posted : Sunday, September 15, 2013 8:12:50 PM(UTC)
kwinky2003

Rank: Member

Groups: Registered
Joined: 9/15/2013(UTC)
Posts: 2
Hello, my name is Ken
Im working on a Maytag Neptune MLG2000AWW.
The washing machine is the problem.
First of all the ON LIGHT wont come on altho the machine starts filling
The DOOR LOCK LIGHT does not come on.
If I keep the START button pushed in the machine continues to fill and agitate then drain but it will not spin. It does not pump out all the water in the tub but water is not visible in the tub, you can hear it slosh around when tub is rotated.
Ive tried replacing the TIMER, no luck.
Ive tried replacing the MOTOR CONTROL BOARD, no luck.
Does this machine have a PUMP FILTER?
Can the DOOR LATCH MECHANISM be checked.
Any help will be greatly appreciated.
Ken
Back to top
Users browsing this topic
Guest (8)
Similar Topics
Washer stops between cycles (Washer Repair)
by 54591974 2/11/2013 7:04:07 AM(UTC)
washer stops between cycles (Washer Repair)
by ruthwilson 2/26/2011 10:37:29 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET