Replacing door gasket seal on side by side Kitchen Aid Refrigerator - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Replacing door gasket seal on side by side Kitchen Aid Refrigerator Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: SUPERBA	Brand: Kitchen Aid	Age: 5 - 10 years
Previous Topic Next Topic

curtisn		#1 Posted : Tuesday, November 20, 2012 3:00:41 PM(UTC)
Rank: Member Groups: Registered Joined: 10/3/2009(UTC) Posts: 7		I have a Kitchen Aid Side by Side Freezer/Fridge and the door gasket seal on the fridge side (lower part of door) has worn out. From looking at the door it looks like the existing gasket seal is held in place by adhesive and I believe I just need to remove the old gasket by peeling it off and cleaning up area to remove and sticky residue and then just install new (I assume new has adhesive on one side) Is this correct? Thanks for any help in advance C


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

rickgburton		#2 Posted : Tuesday, November 20, 2012 5:54:11 PM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/21/2012(UTC) Posts: 263		Probably no adhesive but would need your model number to look it up. I believe it just pushes into a grove all the way around the door.


User Profile View All Posts by User View Thanks

curtisn		#3 Posted : Tuesday, November 20, 2012 6:18:25 PM(UTC)
Rank: Member Groups: Registered Joined: 10/3/2009(UTC) Posts: 7		Originally Posted by: rickgburton Probably no adhesive but would need your model number to look it up. I believe it just pushes into a grove all the way around the door. Model Number KSRB25FKSS04


User Profile View All Posts by User View Thanks

rickgburton		#4 Posted : Tuesday, November 20, 2012 6:26:59 PM(UTC)
Rank: Advanced Member Groups: Expert Joined: 10/21/2012(UTC) Posts: 263		Pushes into the channel around the door with no adhesive.


User Profile View All Posts by User View Thanks

curtisn		#5 Posted : Tuesday, November 20, 2012 6:39:16 PM(UTC)
Rank: Member Groups: Registered Joined: 10/3/2009(UTC) Posts: 7		Originally Posted by: rickgburton Pushes into the channel around the door with no adhesive. So I just pull old out (brute force) and muscle the new one back in? Can I leave the door on?


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (4)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close