Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
207 Pages«<3334353637>»
Freezer is fine, refrigerator is too warm.
Options
Go to last post Go to first unread
Brand: -brand- Age: Less than 1 year
Previous Topic Next Topic
Gene  
#341 Posted : Monday, April 6, 2009 3:40:36 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: tjl Go to Quoted Post
...I have done manual defrost twice and am convinced that [COLOR="Navy"]the problem is with the defrost control[/COLOR]. I have been wondering how to remove the back panel of the freezer?...


The defrost controls by the main control board (#801 on the diagram) which is on the back of the refrigerator. You do not have to remove the back panel in the freezer in such case.

- The part number for the main control board is AP4297272

Gene.
Back to top
tjl  
#342 Posted : Monday, April 6, 2009 5:35:30 PM(UTC)
tjl

Rank: Member

Groups: Registered
Joined: 3/27/2009(UTC)
Posts: 11
Gene,

Thanks for your kind help. I didn't make it clear when I mention defrost control. I should have said one of the component in the defrost system, main control board, thermostat, or defrost heater is broken. Now if in my case is one of the latter two, how to remove the back panel? Some step by step instructions with pictures will be best for me since I never worked on fridges before.

Originally Posted by: Gene Go to Quoted Post
The defrost controls by the main control board (#801 on the diagram) which is on the back of the refrigerator. You do not have to remove the back panel in the freezer in such case.

- The part number for the main control board is AP4297272

Gene.
Back to top
Gene  
#343 Posted : Monday, April 6, 2009 7:42:34 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Did you check the defrost circuit from the control board as described on page 3 of this thread (addressed to [COLOR="Red"]bohemian[/COLOR])? If you did, what is the result?

Gene.
Back to top
tjl  
#344 Posted : Tuesday, April 7, 2009 6:07:30 PM(UTC)
tjl

Rank: Member

Groups: Registered
Joined: 3/27/2009(UTC)
Posts: 11
Not yet. Seems I didn't read the instructions on page 3 carefully. I have thought that I need to remove the back panel to do the test. :) Will do this weekend.
Back to top
tjl  
#345 Posted : Friday, April 10, 2009 11:56:29 AM(UTC)
tjl

Rank: Member

Groups: Registered
Joined: 3/27/2009(UTC)
Posts: 11
Gene,

I just checked the wires on the control board. I tried to remove the blue wire on J9 but found it's pretty hard to do it. What I did was to remove the J7 connector, measure the resistance between pin 9 and J7 (with the blue wire connected). The circuit was open when the freezer is cold. The resistance between J8 and pin 9 on J7 is 3.8 ohms. I also tried J11 and the reading of about 100 appeared for a second and then infinity. What can you conclude from such information?

Thanks!

TJL

Originally Posted by: Gene Go to Quoted Post
Did you check the defrost circuit from the control board as described on page 3 of this thread (addressed to bohemian)? If you did, what is the result?

Gene.
Back to top
Gene  
#346 Posted : Friday, April 10, 2009 12:58:47 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You have to remove the rear cover (#241 on the diagram) to check the defrost heater (#230) and the defrost thermostat (#240) for continuity. Just remove the screws holding the cover and pull it out.

Gene.
Back to top
tjl  
#347 Posted : Sunday, April 12, 2009 3:07:40 PM(UTC)
tjl

Rank: Member

Groups: Registered
Joined: 3/27/2009(UTC)
Posts: 11
I removed the back panel today as instructed by Gene. The continuity test on the heater turned out to be open. The thermostat showed a low resistance (<1, freezer cold). I am pretty sure now the defrost heater is burned. I remember in another post somebody said both thermostat and the heater need to be changed. Do I have to change both?
Back to top
woodchuckie  
#348 Posted : Sunday, April 12, 2009 4:13:49 PM(UTC)
woodchuckie

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/10/2009(UTC)
Posts: 1,363
If it's working you don't have to replace it. Maybe some would replace it while they have the back cover off any way.
Back to top
Schweeky  
#349 Posted : Monday, April 13, 2009 12:26:49 PM(UTC)
Schweeky

Rank: Member

Groups: Registered
Joined: 4/13/2009(UTC)
Posts: 1
I have found & replaced the defrost heater. Where is the defrost timer located for model #FRS26ZRGWC? This site does not have a schematic available. Thanks!
Back to top
Gene  
#350 Posted : Monday, April 13, 2009 12:40:56 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: Schweeky Go to Quoted Post
I have found & replaced the defrost heater. Where is the defrost timer located for model #FRS26ZRGWC? This site does not have a schematic available. Thanks!


What is the original problem with your refrigerator?

The defrost timer is shown as #23 on the "controls" diagram.

Gene.
Back to top
Users browsing this topic
Guest (3)
Similar Topics
Freezer is fine, refrigerator is too warm. (Refrigerator & Freezer Repair)
by mrhoagie 11/3/2012 1:46:58 PM(UTC)
Another Freezer is fine, refrigerator is too warm. (Refrigerator & Freezer Repair)
by rzeune 10/7/2010 9:19:39 AM(UTC)
Freezer is fine, refrigerator is too warm. (Refrigerator & Freezer Repair)
by allemich 4/19/2009 8:02:07 PM(UTC)
207 Pages«<3334353637>»
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET