2 Pages12> Go to Page...

Dryer will only run on energy efficient setting Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: LGR8620PGO	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

jdoginbako		#1 Posted : Tuesday, June 26, 2012 5:47:35 PM(UTC)
Rank: Member Groups: Registered Joined: 6/26/2012(UTC) Posts: 1		My Whirlpool dryer started acting up a few weeks aga. It will not run on the timed drying setting nor will it run on the very dry/ towels setting. This means that after starting the dryer I must come bak and re start it at least once or twice to dry a load.:mad: :confused:
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Gene		#2 Posted : Wednesday, June 27, 2012 5:16:05 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Did you mean it takes longer time to dry a load or it stops before the cycle is done? Gene.
User Profile View All Posts by User View Thanks

hankincm		#3 Posted : Wednesday, September 5, 2012 6:14:27 PM(UTC)
Rank: Member Groups: Registered Joined: 9/5/2012(UTC) Posts: 8		Originally Posted by: Gene Did you mean it takes longer time to dry a load or it stops before the cycle is done? Gene. Gene - Mine too stops before the cycle is done, and only runs when the timer is set to the energy preferred position
User Profile View All Posts by User View Thanks

Gene		#4 Posted : Thursday, September 6, 2012 2:33:34 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		What is the complete model number of the dryer? Gene.
User Profile View All Posts by User View Thanks

hankincm		#5 Posted : Thursday, September 6, 2012 5:59:19 PM(UTC)
Rank: Member Groups: Registered Joined: 9/5/2012(UTC) Posts: 8		Originally Posted by: Gene What is the complete model number of the dryer? Gene. LGR8648PW0 About a year ago I replaced both the timer and solenoid coils. Last week I replaced both the Dyer Driver motor and blower wheel, because I thought that was the problem. Thanks again
User Profile View All Posts by User View Thanks

Gene		#6 Posted : Friday, September 7, 2012 5:21:11 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Sounds like the problem is a bad cycling thermostat which is located on the blower housing. - The cycling thermostat Part number: 3387134 Here are the breakdown diagrams and Replacement parts for Whirlpool LGR8648PW0 29"GAS DRYER | AppliancePartsPros.com Gene.
User Profile View All Posts by User View Thanks

hankincm		#7 Posted : Friday, September 21, 2012 1:16:56 PM(UTC)
Rank: Member Groups: Registered Joined: 9/5/2012(UTC) Posts: 8		Originally Posted by: Gene Sounds like the problem is a bad cycling thermostat which is located on the blower housing. - The cycling thermostat Part number: 3387134 Here are the breakdown diagrams and Replacement parts for Whirlpool LGR8648PW0 29"GAS DRYER | AppliancePartsPros.com Gene. Gene - I got back from vacation, ordered the part and just installed it. However, the machine will still only start in the energy preferred position. Any other suggestions? Thanks.
User Profile View All Posts by User View Thanks

Gene		#8 Posted : Saturday, September 22, 2012 11:03:02 AM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		It would not start or it would not heat in other positions? Gene.
User Profile View All Posts by User View Thanks

hankincm		#9 Posted : Saturday, September 22, 2012 11:08:21 AM(UTC)
Rank: Member Groups: Registered Joined: 9/5/2012(UTC) Posts: 8		Originally Posted by: Gene It would not start or it would not heat in other positions? Gene. It will not start. Thanks Gene for all your help thus far.
User Profile View All Posts by User View Thanks

Gene		#10 Posted : Saturday, September 22, 2012 11:32:00 AM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Unplug the dryer. Open the control panel. Remove the wires from the "BU" & "BK" terminals at the timer. Check for continuity across these terminals with different timer settings. Post the results, Gene.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (5)

2 Pages12> Go to Page...