Rank: Member
Groups: Registered
Joined: 9/4/2012(UTC) Posts: 3
|
Model #: GV2500XTPQ6 I have a white WhirlPool Quiet Partner 3 and am having issues. The Accusense light is blinking. I can get other lights to come on in different ways by doing the reset maneuvers, etc., but can get nothing else to happen. From my reading this is a bad control board. Do you have a part to fix this and is it feasible for someone inexperienced in this particular area to put it in?
Thanks,
Jake
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Hi Jake,
The model number you posted does not come up. Is it made to use in US? Verify the model number and repost it please.
Gene.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/4/2012(UTC) Posts: 3
|
I apologize. Typo. Model number is:
GU2500XTPQ6
Thank you!
-Jake
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Hi Jake, Most likely the problem is a bad control panel but there is a small chance for the control board to be bad as well. I would replace the control panel first. - The control panel Part number: 3385745
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close