Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Error Code FF on GE Monogram ZISW42EMB
Options
Go to last post Go to first unread
Model: GE MONOGRAM ZISW42EMB Brand: GE Age: More than 10 years
Previous Topic Next Topic
jaffman  
#1 Posted : Wednesday, July 25, 2012 10:31:22 AM(UTC)
jaffman

Rank: Member

Groups: Registered
Joined: 7/26/2010(UTC)
Posts: 8
I have a 15+ year old GE Monogram 42" side by side built in refrigerator model #ZISW42EMB that over the last few weeks is showing Error FF on the freezer door information panel. Usually it goes away in several hours or if I power off/on the refrigerator. I vacuumed the dust from the condenser and surrounding parts. The freezer is still cold enough. Also, the Warm Temperature light comes on for a bit but not as long as Error FF.

It appears the condenser fan runs more often than in the past.

Any suggestions would be great.

thanks


[FONT="Verdana","sans-serif"][/FONT]
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Simon / APP Team  
#2 Posted : Wednesday, July 25, 2012 2:52:44 PM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Hi.

Check the temperature in both : freezer and fresh food.
Check the air flow at the damper control.See if it's open enough.

Thank you.

Simon.
Back to top
jaffman  
#3 Posted : Tuesday, August 7, 2012 7:17:10 AM(UTC)
jaffman

Rank: Member

Groups: Registered
Joined: 7/26/2010(UTC)
Posts: 8
Now I'm getting a CC error in additional to the FF error. The refrigerator is cold but the freezer is warmer. I have the temperature dial in the freezer set to 9. If I unplug the power for a few minutes the error messages go away for a while but return shortly.

thanks
Back to top
Simon / APP Team  
#4 Posted : Tuesday, August 7, 2012 12:03:08 PM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Hi.

If both evaporator and condenser motors are running and the condenser is clean I recommend you to call the service co. It may be a sealed system problem.

Thank you.

Simon.
Back to top
jaffman  
#5 Posted : Wednesday, August 8, 2012 8:54:10 AM(UTC)
jaffman

Rank: Member

Groups: Registered
Joined: 7/26/2010(UTC)
Posts: 8
I've contacted a technical from GE to come and take a look.

I cannot find the Damper control to check airflow. Can you tell me where to look on parts diagram, Replacement parts for General Electric ZISW42EMB Refrigerator | AppliancePartsPros.com?

Also, i want to take the panel off in the freezer to check the coils for frost. Is their a service manual to help me understand the best way to do this?

thanks
dave
Back to top
Simon / APP Team  
#6 Posted : Wednesday, August 8, 2012 9:39:07 AM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Hi.

The damper control is #216 on the diag.#5.

The sealed unit breakdown is in diag.#5.

Simon.
Back to top
bobrien6  
#7 Posted : Friday, June 27, 2014 7:51:49 AM(UTC)
bobrien6

Rank: Member

Groups: Registered
Joined: 6/27/2014(UTC)
Posts: 1
I have the exact problem stated by the other person. What was his solution?
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET