Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
keithv  
#1 Posted : Thursday, November 29, 2007 10:32:47 AM(UTC)
keithv

Rank: Member

Groups: Registered
Joined: 11/29/2007(UTC)
Posts: 3

Kenmore classic grille electric. None of the burners nor the oven or broiler will turn on. The clock display only comes on if any of the above is turned on. I do hear the "click" when oven or broiler are turned on, but no heat is produced. Please advise
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Thursday, November 29, 2007 12:54:02 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The first thing I would check is the circuit breakers for the range. They both should be on.

If there is nothing wrong, then I need you to double check the model number. It's probably incomplete or incorrect.

Gene.
keithv  
#3 Posted : Thursday, November 29, 2007 5:38:03 PM(UTC)
keithv

Rank: Member

Groups: Registered
Joined: 11/29/2007(UTC)
Posts: 3

checked the circuit breaker-that's ok. I double checked the model #. It is 911.4688690 for a Kenmore slide in electric. Serial # 6x61666. Thanks for your prompt reply
-Keith
Gene  
#4 Posted : Thursday, November 29, 2007 5:59:51 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Unfortunately this model number does not come up. May be due to age.

Sounds like there is a missing power leg or a short inside the range, but the first thing I would check is the power from the outlet or the junction box, if it's hardwired.

Next I would recommend to pull the range off the wall and check all wires and connections, starting from the power cord.

Post your findings.

Gene.

P.S. If you have the wiring diagram, post it too.
keithv  
#5 Posted : Sunday, December 2, 2007 10:42:44 PM(UTC)
keithv

Rank: Member

Groups: Registered
Joined: 11/29/2007(UTC)
Posts: 3

Pulled the range out from the wall and found the power cord partially out of the outlet. Pushed it back in and we are fully operational again. To think I was about to spend a thousand bucks to replace this makes me shudder! Thanks for your help, I might have disregarded the outlet altogether if not for your advice. Now, any tips for finding relacement knobs for the burners? -Keith
Gene  
#6 Posted : Monday, December 3, 2007 9:55:08 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
It is not possible to find any replacement parts if the model number does not come up. The only thing what could help if there is a part number on the old knob.

Gene.

P.S. You can try to call Sears with the model number what you have.
Users browsing this topic
Guest (5)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.