Rank: Member
Groups: Registered
Joined: 11/29/2007(UTC)
Posts: 3
|
Kenmore classic grille electric. None of the burners nor the oven or broiler will turn on. The clock display only comes on if any of the above is turned on. I do hear the "click" when oven or broiler are turned on, but no heat is produced. Please advise
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
The first thing I would check is the circuit breakers for the range. They both should be on.
If there is nothing wrong, then I need you to double check the model number. It's probably incomplete or incorrect.
Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/29/2007(UTC)
Posts: 3
|
checked the circuit breaker-that's ok. I double checked the model #. It is 911.4688690 for a Kenmore slide in electric. Serial # 6x61666. Thanks for your prompt reply
-Keith
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Unfortunately this model number does not come up. May be due to age.
Sounds like there is a missing power leg or a short inside the range, but the first thing I would check is the power from the outlet or the junction box, if it's hardwired.
Next I would recommend to pull the range off the wall and check all wires and connections, starting from the power cord.
Post your findings.
Gene.
P.S. If you have the wiring diagram, post it too.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/29/2007(UTC)
Posts: 3
|
Pulled the range out from the wall and found the power cord partially out of the outlet. Pushed it back in and we are fully operational again. To think I was about to spend a thousand bucks to replace this makes me shudder! Thanks for your help, I might have disregarded the outlet altogether if not for your advice. Now, any tips for finding relacement knobs for the burners? -Keith
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
It is not possible to find any replacement parts if the model number does not come up. The only thing what could help if there is a part number on the old knob.
Gene.
P.S. You can try to call Sears with the model number what you have.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
