Error codes F1-1 and F3-1 - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Error codes F1-1 and F3-1 Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: JGS8850ADS	Brand: Jenn-Air	Age: 1 - 5 years
Previous Topic Next Topic

dawirick		#1 Posted : Saturday, February 28, 2009 1:34:50 PM(UTC)
Rank: Member Groups: Registered Joined: 2/28/2009(UTC) Posts: 2		Receiving F1-1 and F3-1 error codes and oven shuts down. After resetting I may be able to use it for an hour(?) if at all. Sometimes it acts like it's working yet the oven cavity remains unheated. I have already replaced the "Short Sensor" and I think I'm now looking at a "Clock board" replacement. Does this sound correct?????


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Sunday, March 1, 2009 5:13:18 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Model JGS8850ADS Here are a service manual and a tech sheet http://www.servicematters.com/m...ibrary/docs/16022089.pdf http://www.servicematters.com/m...ibrary/docs/16025921.pdf After resetting I may be able to use it for an hour(?) if at all. Sometimes it acts like it's working yet the oven cavity remains unheated. The above does point to the board problem since it is not heating but not giving you an error. I would check a couple things 1. Run the diagnostics in the tech sheet 2. I notice that the sensor runs goes to a plug then to the board. Check that the pins in the plug are not corroded. Often just a light broen or dull silver color to them. Also check the the wires going into the pins are properly crimped 3. Not a bad idea to check the sensor with a meter but this is a long shot. After that the board rises to the top of the list as the culprit.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

dawirick		#3 Posted : Sunday, March 1, 2009 11:51:55 AM(UTC)
Rank: Member Groups: Registered Joined: 2/28/2009(UTC) Posts: 2		den man: Excellent information. This was just the type of Information I've been searching for!!!!! Weeks looking for a service manual! How did you find one????? I'll let you know the results. Thank you.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close