Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
door opens too far
Options
Go to last post Go to first unread
Model: FDB435RFR4 Brand: Frigidaire Age: 5 - 10 years
Previous Topic Next Topic
stevedebr  
#1 Posted : Sunday, January 15, 2012 5:10:03 PM(UTC)
stevedebr

Rank: Member

Groups: Registered
Joined: 1/15/2012(UTC)
Posts: 3
D/W door opened too far and obviously needed one or both springs replaced. Ordered springs & links, but found hinges weren't designed for links, had only small rivet-like protrusion on which to hook the spring. Can't see anything missing or broken that lets the door open too far; what am I overlooking?
Thanks for your help!
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Monday, January 16, 2012 3:15:12 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Replacement parts for FRIGIDAIRE FDB435RFR4 Frg(v0) | AppliancePartsPros.com

Take a look at items 3 in Section 3, Click on the picture for a better view.
Perhaps they are deformed.

Pull the dishwasher forward a foot or so and try the door it should be fairly obvious as to what stops it in the open position.
THIS FORUM IS DEAD!!!!!!!
Back to top
stevedebr  
#3 Posted : Monday, January 16, 2012 3:34:57 PM(UTC)
stevedebr

Rank: Member

Groups: Registered
Joined: 1/15/2012(UTC)
Posts: 3
What is obvious is that the door opens until the hinge hits the frame, and that happens when the door is below horizontal. I can't see any problem with the hinges, they aren't split or bent that is visible. Is there something else the hinge should rest against when the door is opened? I appreciate your help!
Back to top
denman  
#4 Posted : Tuesday, January 17, 2012 11:26:51 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
I do not know of anything else that holds the door level.

Did you check that the dishwasher itsel is still level and not pulled up at the back.

Perhaps you could jiggery pokery a fix by adding something to the frame.
I am thinking of the self stick rubber feet that are available at Home depot etc.
Some of them are about half an inch thick.
THIS FORUM IS DEAD!!!!!!!
Back to top
stevedebr  
#5 Posted : Tuesday, January 17, 2012 6:04:36 PM(UTC)
stevedebr

Rank: Member

Groups: Registered
Joined: 1/15/2012(UTC)
Posts: 3
Although I was hoping for the satisfaction of finding something defective and replacing it, stick-on rubber feet sounds like the perfect way to make it behave better. Thanks for your input!
Back to top
Users browsing this topic
Guest (4)
Similar Topics
Door opens too far (Dishwasher Repair)
by jtpiano 7/7/2014 8:30:07 AM(UTC)
Dishwasher door opens too far after being fallen on (Dishwasher Repair)
by Wixman 1/4/2014 10:13:13 PM(UTC)
Door opens too far (Dishwasher Repair)
by BaRW 3/5/2012 10:24:45 AM(UTC)
Door opens too far (Dishwasher Repair)
by chouseal 2/13/2012 7:30:49 AM(UTC)
GE Fridge door opens too far (Refrigerator & Freezer Repair)
by Dan3440 11/11/2011 9:12:31 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET