Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
5 Pages<1234>»
Need help troubleshooting Kitchenaid continuously running banging
Options
Go to last post Go to first unread
Model: KUCS03FTSS0 Brand: Kitchen Aid Age: 1 - 5 years
Previous Topic Next Topic
magician59  
#11 Posted : Tuesday, December 13, 2011 10:15:09 AM(UTC)
magician59

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/16/2007(UTC)
Posts: 3,273
Do you get a reading across the two wires when you close the start switch?
Back to top
frank the tank  
#12 Posted : Tuesday, December 13, 2011 10:34:33 AM(UTC)
frank the tank

Rank: Member

Groups: Registered
Joined: 11/14/2011(UTC)
Posts: 27
just checked again. With both wires off I get a reading weather on or off,, Where to next..
Back to top
magician59  
#13 Posted : Tuesday, December 13, 2011 10:47:44 AM(UTC)
magician59

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/16/2007(UTC)
Posts: 3,273
I'm stumped.
Back to top
frank the tank  
#14 Posted : Tuesday, December 13, 2011 10:49:10 AM(UTC)
frank the tank

Rank: Member

Groups: Registered
Joined: 11/14/2011(UTC)
Posts: 27
to clarify, i took the wires off the switch and weather I turn the start to on or off I get a reading.

Hey thanks for the time and help by the way. Im going on 3 hrs and have done all I could do.
Back to top
frank the tank  
#15 Posted : Tuesday, December 13, 2011 10:51:37 AM(UTC)
frank the tank

Rank: Member

Groups: Registered
Joined: 11/14/2011(UTC)
Posts: 27
stumped doesnt sound promising... guess Ill have someone come out. shame only about 2 years old
Back to top
Gene  
#16 Posted : Tuesday, December 13, 2011 2:17:45 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Frank,

You probably overlooked something or did some test wrong.

Can you describe step by step how did you check the start switch (#14 on the diagram UserPostedImage), the proper alignment of the pedal, the top limit directional switch and it's alignment please?

Gene.
Back to top
frank the tank  
#17 Posted : Tuesday, December 13, 2011 2:40:41 PM(UTC)
frank the tank

Rank: Member

Groups: Registered
Joined: 11/14/2011(UTC)
Posts: 27
I'm at work at the moment gene. But i followed the troubleshooting instructions as outlined in the repair paper attached to tue unit. Only thing I'm not really sure how to check for alignment. It appears the metal tab on the upper limit switch appears to be engaged as the Compactor is in the up position. The pedal seems ok. I checked to make sure the metal tab is not depressing the start button constantly.

I'm sure I must be nssing something.
Back to top
Gene  
#18 Posted : Tuesday, December 13, 2011 2:48:50 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
How did you run the continuity tests? Did you remove the wires from a device being tested?

Gene.
Back to top
frank the tank  
#19 Posted : Tuesday, December 13, 2011 2:54:17 PM(UTC)
frank the tank

Rank: Member

Groups: Registered
Joined: 11/14/2011(UTC)
Posts: 27
I'm pretty sure i did but will rerun tests again tomorrow. I know I checked the wires as well.
Back to top
frank the tank  
#20 Posted : Wednesday, December 14, 2011 7:33:38 AM(UTC)
frank the tank

Rank: Member

Groups: Registered
Joined: 11/14/2011(UTC)
Posts: 27
#14 was rechecked with wires off. I get a reading then when button is depressed reading is no more...
Back to top
Users browsing this topic
Guest (5)
5 Pages<1234>»
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET