my maytag dishwasher wont spray water with any significant pressure - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

my maytag dishwasher wont spray water with any significant pressure Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: QUIET SERIES 300	Brand: Maytag	Age: 5 - 10 years
Previous Topic Next Topic

nailznine		#1 Posted : Monday, December 12, 2011 4:46:19 PM(UTC)
Rank: Member Groups: Registered Joined: 12/12/2011(UTC) Posts: 3		my dishwasher wont spray water with any significant pressure to wash dishes.This problem is recent. I rigged the switch to see inside the dishwasher while running and here is what its doin..It drains fine, and it gets the water supply ok but when the cycle starts, the water pressure is fine for about 5 seconds then quickly dies down to a trickle.. The motor is running and it is draining fine....what could be the problem...please help


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

ApplianceJunk		#2 Posted : Monday, December 12, 2011 4:57:38 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 7/24/2007(UTC) Posts: 2,277		Hi, Your model may have a filter/screen inside that needs to be cleaned. quiet series 300 is not the model number I need to look up a diagram. Please post the full model number that is on the model/serial number tag that can be found on the dishwasher.


User Profile View All Posts by User View Thanks

nailznine		#3 Posted : Monday, December 12, 2011 5:05:50 PM(UTC)
Rank: Member Groups: Registered Joined: 12/12/2011(UTC) Posts: 3		Originally Posted by: ApplianceJunk Hi, Your model may have a filter/screen inside that needs to be cleaned. quiet series 300 is not the model number I need to look up a diagram. Please post the full model number that is on the model/serial number tag that can be found on the dishwasher. Sorry bud..The model # is--mdb7600aww Serial # is--23710434en thank you for ur assistance


User Profile View All Posts by User View Thanks

ApplianceJunk		#4 Posted : Monday, December 12, 2011 5:12:03 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 7/24/2007(UTC) Posts: 2,277		Look at #7 pump filter in this diagram for your model dishwasher. Pump & motor replacement parts for MAYTAG MDB7600AWW DISHWASHER- UNDERCOUNTER \| AppliancePartsPros.com Could be getting plugged up with hard water deposits.


User Profile View All Posts by User View Thanks

nailznine		#5 Posted : Monday, December 12, 2011 5:29:56 PM(UTC)
Rank: Member Groups: Registered Joined: 12/12/2011(UTC) Posts: 3		ok..I have that #7 pump filter in my hand..On top of it there are some particles of sediment/deposits but i have no way to check inside it..How do I check it to make sure it is good or bad.. and once again, thank you for your assistance:)


User Profile View All Posts by User View Thanks

ApplianceJunk		#6 Posted : Monday, December 12, 2011 5:50:46 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 7/24/2007(UTC) Posts: 2,277		Here is the service manual for your model dishwasher. http://appliancejunk.com...ownloads;sa=view;down=83 It has some great troubleshooting information that you may find helpful. On page 4-16 it talks about POOR WATER CIRCULATION.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close