Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
kenmore DW pumps out in wash cycle
Options
Go to last post Go to first unread
Brand: Kenmore Age: 5 - 10 years
Previous Topic Next Topic
paul martin  
#1 Posted : Wednesday, October 12, 2011 7:06:08 PM(UTC)
paul martin

Rank: Member

Groups: Registered
Joined: 10/12/2011(UTC)
Posts: 5
I have a client whose kenmore DW pumps out while in wash cycle-what do you think?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Thursday, October 13, 2011 4:39:29 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
A model number may help others help you.

Did the unit used to run OK? If not it could be the drain is not looped higher than where it enters the house plumbing or perhaps it has come loose and fallen.

If the unit has a separate drain pump you will have to find out if that pump is running when it should not be.
The unit may also have a check valve or flapper valve that is not closing properly.
THIS FORUM IS DEAD!!!!!!!
Back to top
paul martin  
#3 Posted : Thursday, October 13, 2011 6:14:26 AM(UTC)
paul martin

Rank: Member

Groups: Registered
Joined: 10/12/2011(UTC)
Posts: 5
The unit ran correctly one minute and next it didn't.
All plumbing intact and check valve clear-no obstruction.
No separate drain pump in system.No energized drain valve in system.
Does this motor reverse in order to drain.
Thanks denman for your ideas-Paul
Back to top
denman  
#4 Posted : Thursday, October 13, 2011 7:02:20 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Still need a model number.
Kenmore does not make anything so it could be anyone's unit.
Model Number Locator
THIS FORUM IS DEAD!!!!!!!
Back to top
paul martin  
#5 Posted : Thursday, October 13, 2011 7:44:08 AM(UTC)
paul martin

Rank: Member

Groups: Registered
Joined: 10/12/2011(UTC)
Posts: 5
I'll be back w/model# etc. shortly
thanks denman-paul
Back to top
paul martin  
#6 Posted : Thursday, October 13, 2011 9:34:25 AM(UTC)
paul martin

Rank: Member

Groups: Registered
Joined: 10/12/2011(UTC)
Posts: 5
denman or others-
kenmore m#-665.17425792
when dw in wash mode lead from relay shows 118v to N,wash lead from timer shows 45v to N,drain lead from timer shows 45v to N.It pumps out during both wash & drain modes.
thx-paul
Back to top
denman  
#7 Posted : Thursday, October 13, 2011 1:14:50 PM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are the parts
Replacement parts for KENMORE 66517425792 | AppliancePartsPros.com

The Sears parts site will have parts breakdowns.

See the attachment for the tech sheet.

Here is a manual. I am not sure if it is an exact match but looking at the pump it should be close.
http://appliancedigest.c...eshooting-service-manual
You have to join the site to download the manual but it is free and this is a very good site for manuals and other info for the appliance repair DIYer.

I would start with the soil separator it is a common problem.
File Attachment(s):
17425792.pdf (746kb) downloaded 3 time(s).
THIS FORUM IS DEAD!!!!!!!
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET