Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Whirlpool Washer will not spin
Options
Go to last post Go to first unread
Model: LA9680XWW0 Brand: Whirlpool Age: More than 10 years
Previous Topic Next Topic
MeanGene  
#1 Posted : Thursday, September 22, 2011 4:39:41 PM(UTC)
MeanGene

Rank: Member

Groups: Registered
Joined: 9/22/2011(UTC)
Posts: 6
The washer will not spin, it just fills up with water and sits there. Replaced the coupler and pump because they needed it. The motor will just hum until the internal breaker pops. The motor stop humming when you open the lid. The motor does turn. Took it out and benched tested the wires with an ohm meter and everything checked out OK. Maybe the motor Centrifugal switch?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
MeanGene  
#2 Posted : Saturday, September 24, 2011 4:04:31 PM(UTC)
MeanGene

Rank: Member

Groups: Registered
Joined: 9/22/2011(UTC)
Posts: 6
I have checked the motor switch and it seems to be OK, still want to figure out what is going on with this.
Back to top
richappy  
#3 Posted : Sunday, September 25, 2011 1:24:03 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Check for lateral play in the motor shaft, if so, replace the motor.AP2907254
Back to top
MeanGene  
#4 Posted : Tuesday, September 27, 2011 3:45:31 PM(UTC)
MeanGene

Rank: Member

Groups: Registered
Joined: 9/22/2011(UTC)
Posts: 6
I checked the lateral play and there is some. When you move it back and forth there is a slight clack. It measured around .024 in total movement. Would that cause the problem, motors aren't cheap.
Back to top
richappy  
#5 Posted : Wednesday, September 28, 2011 12:52:14 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
You have a bad motor, bearing play causes the rotor to jam against the stator housing.
Back to top
Users browsing this topic
Guest (2)
Similar Topics
Whirlpool Washer will not spin and ultimately drain (Washer Repair)
by cvaughn101683 2/11/2014 3:30:01 PM(UTC)
Whirlpool washer will not spin without me manually turning the drum (Washer Repair)
by anc6802 12/21/2011 3:28:19 PM(UTC)
whirlpool washer will not spin (Washer Repair)
by mustangjones1 2/17/2011 4:32:58 PM(UTC)
Whirlpool washer will not spin (Washer Repair)
by ski1of5 9/1/2010 4:23:29 PM(UTC)
Whirlpool Washer will not spin clothes completely (Washer Repair)
by alinosa 5/28/2010 5:16:29 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET