Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages12>
Replaced Element and Sensor Still Error Now What????
Options
Go to last post Go to first unread
Model: RBS305PDS16 Brand: Whirlpool Age: 1 - 5 years
Previous Topic Next Topic
garylrodgers  
#1 Posted : Wednesday, December 24, 2008 7:55:20 AM(UTC)
garylrodgers

Rank: Member

Groups: Registered
Joined: 12/24/2008(UTC)
Posts: 8
I replaced the Broil Element and the Sensor in this oven. After replacing both items the the system would not regulate the heat. The Broil element would stay hot. I then shut power off to the oven at the breaker for about 10 minutes and tried again. After the oven went through the preheat I received Error code E2 F3. This shows bad sensor, just replaced sensor, what gives?? Am I missing a step in the process??:confused:
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
libertyappl  
#2 Posted : Wednesday, December 24, 2008 8:35:01 AM(UTC)
libertyappl

Rank:: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
Check you connections to the sensor.

Nat
Back to top
garylrodgers  
#3 Posted : Wednesday, December 24, 2008 10:40:12 AM(UTC)
garylrodgers

Rank: Member

Groups: Registered
Joined: 12/24/2008(UTC)
Posts: 8
Is there a way to test the sensor? I checked the connection and it all seems to be good.
Back to top
libertyappl  
#4 Posted : Wednesday, December 24, 2008 10:48:21 AM(UTC)
libertyappl

Rank:: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
You can test it with an ohm meter to see if it has continuity.

Nat
Back to top
garylrodgers  
#5 Posted : Wednesday, December 24, 2008 11:01:34 AM(UTC)
garylrodgers

Rank: Member

Groups: Registered
Joined: 12/24/2008(UTC)
Posts: 8
Is there a range in the reading that I should be looking for?
Back to top
libertyappl  
#6 Posted : Wednesday, December 24, 2008 11:04:55 AM(UTC)
libertyappl

Rank:: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
It should be listed on the tech sheet, usually inside the control panel.

Nat
Back to top
garylrodgers  
#7 Posted : Wednesday, December 24, 2008 12:20:44 PM(UTC)
garylrodgers

Rank: Member

Groups: Registered
Joined: 12/24/2008(UTC)
Posts: 8
I am getting 1.088K on both the old sensor as well as the new one. My problem must be somewhere else??
Back to top
denman  
#8 Posted : Wednesday, December 24, 2008 1:43:52 PM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
In case you do not have it here is the tech sheet
https://www.servicematters.com/d...0Sheet%20-%208301758.pdf
THIS FORUM IS DEAD!!!!!!!
Back to top
garylrodgers  
#9 Posted : Wednesday, December 24, 2008 3:02:44 PM(UTC)
garylrodgers

Rank: Member

Groups: Registered
Joined: 12/24/2008(UTC)
Posts: 8
Thanks, that helps except for now the door is locked and it is closed and I cant get it open. This is great for baking at Christmas...
Back to top
garylrodgers  
#10 Posted : Sunday, December 28, 2008 5:59:19 PM(UTC)
garylrodgers

Rank: Member

Groups: Registered
Joined: 12/24/2008(UTC)
Posts: 8
Thanks, that helps except for now the door is locked and it is closed and I cant get it open. This is great for baking at Christmas...
Back to top
Users browsing this topic
Guest (6)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET