12 Pages«<678910>» Go to Page...

How To Check Continuity With Ohmmeter Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
	Brand: -brand-	Age: Less than 1 year
Previous Topic Next Topic

Gene		#71 Posted : Friday, March 11, 2011 7:10:42 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: eggy ...Last night it just 'died'... Can you describe it more detailed? Does anything work? How about lights inside and water dispenser? Gene.
User Profile View All Posts by User View Thanks

Gman44		#72 Posted : Sunday, March 13, 2011 7:28:07 AM(UTC)
Rank: Member Groups: Registered Joined: 3/12/2011(UTC) Posts: 1		Very well written article. This is very helpful to a non pro especially. There are some "Pros" out there who could benefit as well.. Again it was written in a very real easy to understand style, like someone would explain it to you in person and NOT sound like a engineer who writes manuals. Thank you
User Profile View All Posts by User View Thanks

bowhunter85		#73 Posted : Thursday, April 7, 2011 7:34:57 PM(UTC)
Rank: Member Groups: Registered Joined: 4/7/2011(UTC) Posts: 1		Kenmore dryer 110.96281100. Need to know how to test thermal cut off & high limit? Originally Posted by: Gene Answered here: http://forum.appliancepartspros...heater-sub-assembly.html Gene.
User Profile View All Posts by User View Thanks

Gene		#74 Posted : Friday, April 8, 2011 3:26:01 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Remove the wires from them and test both for continuity. Gene.
User Profile View All Posts by User View Thanks

daddyratty		#75 Posted : Monday, April 18, 2011 5:09:11 PM(UTC)
Rank: Member Groups: Registered Joined: 3/24/2011(UTC) Posts: 14		..........
User Profile View All Posts by User View Thanks

Methodical		#76 Posted : Sunday, July 24, 2011 12:32:38 PM(UTC)
Rank: Member Groups: Registered Joined: 7/23/2011(UTC) Posts: 18		Nicely written. I am familiar with testing equipment, but I don't do it on a regular basis, therefore, it is helpful to have an article to fall back on. Very kind of you to be so helpful to others. It is much appreciated. Take care.
User Profile View All Posts by User View Thanks

kevmyers11		#77 Posted : Sunday, July 31, 2011 11:52:24 AM(UTC)
Rank: Member Groups: Registered Joined: 7/28/2011(UTC) Posts: 10		Thanks for the info, I hate to sound dumb, but I never ne any of this info. Now I do and it will really help a lot. Thaks...:o
User Profile View All Posts by User View Thanks

Yuridad		#78 Posted : Sunday, August 7, 2011 2:46:52 PM(UTC)
Rank: Member Groups: Registered Joined: 7/23/2011(UTC) Posts: 2		In my Kenmore side-X-side refrigerator, I believe the solenoid for the crushed/whole cube ice selector is bad (I get no reaction pushing the door button when the door switch is depressed as well). I'm assuming this will be a continuity test? If there is an 'infinity' amount of resistance will it be bad? Doh? So, unplug the fridge, remove the wires and test the connectors...ta da!
User Profile View All Posts by User View Thanks

nojuice		#79 Posted : Sunday, August 7, 2011 4:43:01 PM(UTC)
Rank: Member Groups: Registered Joined: 8/7/2011(UTC) Posts: 1		Very helpful, still reading,learning, thanks.
User Profile View All Posts by User View Thanks

Michael Beeler		#80 Posted : Tuesday, October 25, 2011 9:11:18 AM(UTC)
Rank: Member Groups: Registered Joined: 10/25/2011(UTC) Posts: 1		I have a dual burner (Jenn Air JEC9536ADS)not working and want to check the control unit. Has a L1 and L2, however not a H1 and H2. There is a common (3) and an inner (2) and an outter (1). How would I properly test the control?
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (2)

12 Pages«<678910>» Go to Page...