Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
washer will not complete rinse cycle/ dispense fabric softner
Options
Go to last post Go to first unread
Brand: GE Age: Less than 1 year
Previous Topic Next Topic
mike h  
#1 Posted : Monday, December 8, 2008 7:52:06 AM(UTC)
mike h

Rank: Member

Groups: Registered
Joined: 12/8/2008(UTC)
Posts: 5
we have a GE profile prodigy washer. when washing, it will not complete the risnse cycle, won't dispense/drain the fabric softner or spin to dry. was wondering if I should buy your part # AP3140343, a control assembly. Thanks

washer is 5 years old
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Monday, December 8, 2008 4:21:45 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
What is the complete model number of the washer?

Gene.
Back to top
mike h  
#3 Posted : Monday, December 8, 2008 6:12:59 PM(UTC)
mike h

Rank: Member

Groups: Registered
Joined: 12/8/2008(UTC)
Posts: 5
Wpse4200aoww
Back to top
mike h  
#4 Posted : Monday, December 8, 2008 6:14:16 PM(UTC)
mike h

Rank: Member

Groups: Registered
Joined: 12/8/2008(UTC)
Posts: 5
Originally Posted by: Gene Go to Quoted Post
What is the complete model number of the washer?

Gene.





WPSE4200AOWW
Back to top
mike h  
#5 Posted : Monday, December 8, 2008 6:17:12 PM(UTC)
mike h

Rank: Member

Groups: Registered
Joined: 12/8/2008(UTC)
Posts: 5
Originally Posted by: mike h Go to Quoted Post
WPSE4200AOWW


gene, here's the model # WPSE4200AOWW


thanks
Back to top
Gene  
#6 Posted : Tuesday, December 9, 2008 12:36:35 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Mike,

The first thing I would check is the lid switch (#388 on the break down diagram). You have to remove the front panel to access it.

Here are the break down diagrams for the GE washer Model WPSE4200A0WW

Gene.
Back to top
mike h  
#7 Posted : Tuesday, December 9, 2008 2:35:32 PM(UTC)
mike h

Rank: Member

Groups: Registered
Joined: 12/8/2008(UTC)
Posts: 5
with the lid open, by using a magnet attached the washing machine where the lid strip would make contact with it seemed to have fooled the machine to think the lid was closed. In the rinse cycle, I could hear the motor running and the a knob on the control panel trying to advance to the next cycle, but it never went there to dispense the fabric softner neither did it spin.
Back to top
Gene  
#8 Posted : Wednesday, December 10, 2008 8:25:17 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Mike,

Remove the front panel and check the belt.

Bypass the lid switch and run the washer.

When the motor runs, does the transmission pulley run too?

Gene.
Back to top
Users browsing this topic
Guest (5)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET