Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

3 Pages123>
New Topic Post Reply
Options
Go to last post Go to first unread
Earl Dryer  
#1 Posted: : Friday, October 31, 2008 5:44:03 AM(UTC)
Quote
Earl Dryer

Rank: Member

Groups: Registered
Joined: 4/28/2008(UTC)
Posts: 29

Voltage at L1 to Neutral is 120v, Voltage at L2 to Neutral is 120v, Voltage
at L1 to L2 is 240 but voltage at L1 to Chassis Ground is 180-200v & L2 to
Ground is 70v. What is happening. This Unit went dead after self distruct
(cleaning) nothing works, all fuses are good.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
icehouse  
#2 Posted : Friday, October 31, 2008 6:26:49 AM(UTC)
Quote
icehouse

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/1/2008(UTC)
Posts: 440

Originally Posted by: Earl Dryer Go to Quoted Post
Voltage at L1 to Neutral is 120v, Voltage at L2 to Neutral is 120v, Voltage
at L1 to L2 is 240 but voltage at L1 to Chassis Ground is 180-200v & L2 to
Ground is 70v. What is happening. This Unit went dead after self distruct
(cleaning) nothing works, all fuses are good.
See diagnostics :http://www.servicematters.com/docs/wiring/wiring_main.htm
Earl Dryer  
#3 Posted : Friday, October 31, 2008 10:07:32 AM(UTC)
Quote
Earl Dryer

Rank: Member

Groups: Registered
Joined: 4/28/2008(UTC)
Posts: 29

I assume that you want me to see something in the schematic, so lets assume that I there is a shorted Cap in the filter circuit, you think that may be it, by the way L2 is the high leg because I only 70V to the primary on the Xfmr & 0 on the secondary.
icehouse  
#4 Posted : Saturday, November 1, 2008 10:53:31 AM(UTC)
Quote
icehouse

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/1/2008(UTC)
Posts: 440

There seems to be the trouble, nothing on the secondary of the transformer. Let's run a step by step and let us know what are the results.
icehouse  
#5 Posted : Wednesday, November 5, 2008 4:48:59 AM(UTC)
Quote
icehouse

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/1/2008(UTC)
Posts: 440

So what was the outcome? By the way,secondary of this transformer is DC
icehouse  
#6 Posted : Sunday, November 9, 2008 2:55:22 PM(UTC)
Quote
icehouse

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/1/2008(UTC)
Posts: 440

:D Aw come on now. What was the outcome ?
Earl Dryer  
#7 Posted : Monday, November 10, 2008 5:44:19 PM(UTC)
Quote
Earl Dryer

Rank: Member

Groups: Registered
Joined: 4/28/2008(UTC)
Posts: 29

Maybe that what the problem is, this transformer is missing the rectifier circuit to convert the the low voltage AC Give me a break any rectification is going happen on the board. FYI The Voltage on the secondary is approx. 25-30v AC!
icehouse  
#8 Posted : Tuesday, November 11, 2008 5:01:06 AM(UTC)
Quote
icehouse

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/1/2008(UTC)
Posts: 440

Was just curious as to what you have found out as I brought it up at a meeting, and no one could could come up with a reasonable answer.
v2k04  
#9 Posted : Tuesday, November 11, 2008 6:39:01 AM(UTC)
Quote
v2k04

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/9/2008(UTC)
Posts: 784

I'm kinda curious if you get the same readings at the outlet without stove being plugged in
Earl Dryer  
#10 Posted : Wednesday, November 12, 2008 3:28:30 PM(UTC)
Quote
Earl Dryer

Rank: Member

Groups: Registered
Joined: 4/28/2008(UTC)
Posts: 29

Those readings were normal, That is why I was Questioning posibily the suppressor or filter circuit maybe the culprit as far as the readings to ground. I know that the low voltage transformer is bad, I have an open secondary but I only have 80v to primary so even with a good Xfmr my LV output is going to probably pretty low too.
Quick Reply Show Quick Reply
Users browsing this topic
3 Pages123>
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.