Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Lat9206bae
Options
Go to last post Go to first unread
Model: LAT9206BAE Brand: Maytag Age: 5 - 10 years
Previous Topic Next Topic
taylor49  
#1 Posted : Tuesday, October 14, 2008 5:32:32 PM(UTC)
taylor49

Rank: Member

Groups: Registered
Joined: 10/13/2008(UTC)
Posts: 11
won,t spin
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
libertyappl  
#2 Posted : Tuesday, October 14, 2008 6:19:51 PM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
Check your belts first see if one is broken or stretched.
Post your results.
Nat
Back to top
taylor49  
#3 Posted : Wednesday, October 15, 2008 2:37:53 PM(UTC)
taylor49

Rank: Member

Groups: Registered
Joined: 10/13/2008(UTC)
Posts: 11
I took brake off an tub spins freely.could it be the brake ?
Back to top
libertyappl  
#4 Posted : Wednesday, October 15, 2008 3:24:58 PM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
The brake could be grabbing not allowing the tub to spin.
Nat
Back to top
taylor49  
#5 Posted : Thursday, October 16, 2008 3:49:41 PM(UTC)
taylor49

Rank: Member

Groups: Registered
Joined: 10/13/2008(UTC)
Posts: 11
what would you subjest?
Back to top
libertyappl  
#6 Posted : Thursday, October 16, 2008 6:11:35 PM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
Try to turn the brake pulley by hand if it won't then you will have to change the brake/clutch.
Nat
Back to top
taylor49  
#7 Posted : Sunday, November 2, 2008 5:06:59 AM(UTC)
taylor49

Rank: Member

Groups: Registered
Joined: 10/13/2008(UTC)
Posts: 11
could you send me a diagram of the brake\cluch nat?
Back to top
v2k04  
#8 Posted : Sunday, November 2, 2008 6:30:44 AM(UTC)
v2k04

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/9/2008(UTC)
Posts: 784
did you pay attention when you removed the phillips screw and took the dog ear off the transmission pully when you removed it? That little piece has to go on a certain way. or it wont spin when you put it back together.........I will also mention on a dependable care maytag the belts are designed to slip and the motor carrage should have free movement back and forth I've seen the bleach disp leak and corrode the motor carrage and it needs silicon grease and even sometimes new rollers but a streched belt will cause a maytag not to spin because the motor isn't pulling back far enogh to put tension on the belt to make it spin.
Back to top
Users browsing this topic
Guest (4)
Similar Topics
Maytag LAT9206BAE (Washer Repair)
by 454 10/14/2008 5:18:04 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET