3 Pages<123> Go to Page...

Washer will not do anything Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: WFW8300S	Brand: Whirlpool	Age: Less than 1 year
Previous Topic Next Topic

John Lamb		#11 Posted : Friday, September 26, 2008 4:02:27 AM(UTC)
Rank: Member Groups: Registered Joined: 9/22/2008(UTC) Posts: 12		Nat, I thought it was the CCU & I replaced it & it did not change a thing So do you have any suggestions on what I might look at next..?:confused:
User Profile View All Posts by User View Thanks

John Lamb		#12 Posted : Friday, September 26, 2008 5:43:20 AM(UTC)
Rank: Member Groups: Registered Joined: 9/22/2008(UTC) Posts: 12		Nat, I replaced the CCU & nothing changed do you have any suggestions on what I might try next..:confused: Thanks, John
User Profile View All Posts by User View Thanks

libertyappl		#13 Posted : Friday, September 26, 2008 5:44:54 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		John, Test the water valve make sure it's good, don't know why I didn't think of that before....Let me know Nat ps. did you get the rest of the model number?
User Profile View All Posts by User View Thanks

John Lamb		#14 Posted : Friday, September 26, 2008 5:47:53 AM(UTC)
Rank: Member Groups: Registered Joined: 9/22/2008(UTC) Posts: 12		yes I have all the model number WFW8300SW01 where is the water valve located..? where the water comes in..?
User Profile View All Posts by User View Thanks

libertyappl		#15 Posted : Friday, September 26, 2008 5:49:52 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Yes, where the water comes in.....you will have to remove the top again to get to it. Nat
User Profile View All Posts by User View Thanks

libertyappl		#16 Posted : Friday, September 26, 2008 5:55:07 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		This may help also. Nat File Attachment(s): WFW8300SW01 wiring.pdf (179kb) downloaded 9 time(s).
User Profile View All Posts by User View Thanks

John Lamb		#17 Posted : Friday, September 26, 2008 5:57:22 AM(UTC)
Rank: Member Groups: Registered Joined: 9/22/2008(UTC) Posts: 12		Like where the 2 hose connect is that also called the water flow meter.. do you think it could be teh key pad unit..?
User Profile View All Posts by User View Thanks

John Lamb		#18 Posted : Friday, September 26, 2008 6:01:02 AM(UTC)
Rank: Member Groups: Registered Joined: 9/22/2008(UTC) Posts: 12		Nat, I just looked at that latest wiring PDF you sent me. I will try some of those test this weekend & see if I get a Error code.. Thanks, John
User Profile View All Posts by User View Thanks

libertyappl		#19 Posted : Friday, September 26, 2008 6:10:51 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Keep me posted. I will be gone a lot Sat. & Sun., I have to go take my continuing education classes to renew my real estate license. But will check as often as I can and some of the other may jump in as well. Nat
User Profile View All Posts by User View Thanks

John Lamb		#20 Posted : Wednesday, October 1, 2008 4:05:36 AM(UTC)
Rank: Member Groups: Registered Joined: 9/22/2008(UTC) Posts: 12		Nat. I worked on the washer last night & ran the Diagnostic test that it talked about in manual you sent me. I never did get a error code., but after I did run it the light was blinking at rinse/spin when Looked it up it said door lock problem.. Ok I knew that So I have replaced the door switch I have put in a new ccu so what do you think I need to do now. Thanks for the help
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (4)

Similar Topics

whirlpool washer will not do anything but buzz and fill up. (Washer Repair) by KayleeMaesmommy 4/25/2012 11:52:22 AM(UTC)

3 Pages<123> Go to Page...