6 Pages<12345>» Go to Page...

Whirlpool ice maker does not make ice Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: ED5SHAXMQ10	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

DawnML		#21 Posted : Wednesday, September 17, 2008 5:28:21 PM(UTC)
Rank: Member Groups: Registered Joined: 9/17/2008(UTC) Posts: 2		Nat, Is the 'bail arm' also called a 'pivot arm'? There is no picture of this when I look for parts. Dawn
User Profile View All Posts by User View Thanks

libertyappl		#22 Posted : Wednesday, September 17, 2008 5:41:43 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		No, sorry didn't actually look at your model before posting. your system has a laser type sensor not a bail arm. nat
User Profile View All Posts by User View Thanks

darrenM		#23 Posted : Thursday, September 18, 2008 8:40:22 PM(UTC)
Rank: Member Groups: Registered Joined: 9/18/2008(UTC) Posts: 4		Hope to jump in have a similar problem. model ED5SHAXNQ01 Switched the wires to the valves and got water in the im, does that mean the valve is good and im is bad? The thing that rotates and dumps the ice out seems to work. thanks
User Profile View All Posts by User View Thanks

libertyappl		#24 Posted : Friday, September 19, 2008 7:27:41 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Darren, if the part works that dumps the ice then it's probably your thermostat in the ice maker. your valve seems good! Nat
User Profile View All Posts by User View Thanks

darrenM		#25 Posted : Wednesday, September 24, 2008 5:45:04 PM(UTC)
Rank: Member Groups: Registered Joined: 9/18/2008(UTC) Posts: 4		Sorry I've been gone for a few days and just saw your response, thanks for the feedback. So if its the thermostat can I replace that only? Its a Whirlpool with the ice container auger in the door.
User Profile View All Posts by User View Thanks

libertyappl		#26 Posted : Wednesday, September 24, 2008 6:29:43 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Darren, Yes, part # AP3135377, you can test with an ohm meter first. Are your emitter lights flashing? If not they could also be the problem (part# AP3137510) Nat
User Profile View All Posts by User View Thanks

keaton		#27 Posted : Monday, October 20, 2008 4:46:24 PM(UTC)
Rank: Member Groups: Registered Joined: 10/20/2008(UTC) Posts: 1		i am having the same problem. i have the whirlpool side by side. i am not sure of half of the stuff you are talking about here....like emitter lights. all i know is i have water to the door but i am not getting ice made. i need help. thanks..........................
User Profile View All Posts by User View Thanks

Gene		#28 Posted : Tuesday, October 21, 2008 11:19:35 AM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Keaton, What is the complete model number of the refrigerator? Gene.
User Profile View All Posts by User View Thanks

heritage98		#29 Posted : Thursday, November 20, 2008 12:26:45 PM(UTC)
Rank: Member Groups: Registered Joined: 11/20/2008(UTC) Posts: 2		I have a Whirlpool model ED5LHAXMT10. I get water from the door but the ice maker is empty. Can it be that the water line is frozen? Are there two water lines? 1 for water dispenser (working) AND 1 for the ice maker (not working)?
User Profile View All Posts by User View Thanks

libertyappl		#30 Posted : Thursday, November 20, 2008 12:35:39 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		It's possible that the line into the icemaker is frozen or one side of the valve is out, try switching the leads on the valve and pressing the dispenser to see if you get water in the ice maker. If you do then the line isn't frozen. And we can direct you to a different test. Nat
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (7)

6 Pages<12345>» Go to Page...