Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
3 Pages123>
Washer will not do anything
Options
Go to last post Go to first unread
Model: WFW8300S Brand: Whirlpool Age: Less than 1 year
Previous Topic Next Topic
John Lamb  
#1 Posted : Monday, September 22, 2008 6:29:32 AM(UTC)
John Lamb

Rank: Member

Groups: Registered
Joined: 9/22/2008(UTC)
Posts: 12
The door locked on my washer & I could nt get it to open after pushing the door realse switch. So I broke the latch forciing the door open I replaced the switch. I put the washer in the clean washer mode & all that happened was the door locked & is stuck now. other then the light on the control panel nothing happened no movement or anything. So in a nut shell I have a washer that won't do anything & the door is stuck closed & will not respond in any way to controls.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
libertyappl  
#2 Posted : Monday, September 22, 2008 9:05:33 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
If the unit is less than a year old call Whirlpool and have a tech come out.
Nat
Back to top
John Lamb  
#3 Posted : Monday, September 22, 2008 9:57:51 AM(UTC)
John Lamb

Rank: Member

Groups: Registered
Joined: 9/22/2008(UTC)
Posts: 12
I got this washer from a friend & he said he got from his boss so I don't have a receipt on it, or any proff how old it is.. So I don't think I will get any warranty work on it... Thanks for replying
Back to top
libertyappl  
#4 Posted : Monday, September 22, 2008 10:06:39 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
Chances are it's older than a year old so, no.
Sounds like the door lock itself maybe messed up. Did you get an error code?
I wll try to do a little checking on that issue for you.
Nat
Back to top
John Lamb  
#5 Posted : Monday, September 22, 2008 10:12:41 AM(UTC)
John Lamb

Rank: Member

Groups: Registered
Joined: 9/22/2008(UTC)
Posts: 12
Nat,

No I didn't get a error code.. I repleced the door look switch & as soon as I hit the start button it locked the door & that where I am at..
Back to top
libertyappl  
#6 Posted : Monday, September 22, 2008 10:20:54 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
See if this eill help you out a little.
Nat
File Attachment(s):
Duet Job Aid.pdf (1,508kb) downloaded 15 time(s).
Back to top
John Lamb  
#7 Posted : Monday, September 22, 2008 10:53:58 AM(UTC)
John Lamb

Rank: Member

Groups: Registered
Joined: 9/22/2008(UTC)
Posts: 12
Nat,

Thanks I found that earlier & I looked it over at lunch I think I will check the CCU & it functions out.. I think there is where the problem is I think that thing is bad do you know how to get the door to release. I really can't even get to the model number
Thanks for all you help...

John
Back to top
libertyappl  
#8 Posted : Monday, September 22, 2008 11:01:07 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
If you remove the bottom plate on the front you should then be able to reach up and un plug the door switch wires to open the door.
If you are going to check the CCU, try cleaning the contacts, being careful not to bend them, with a pencil eraser. Sometimes corrosion can cause an issue. Let me know if I can help further.
Nat
Back to top
John Lamb  
#9 Posted : Monday, September 22, 2008 11:06:28 AM(UTC)
John Lamb

Rank: Member

Groups: Registered
Joined: 9/22/2008(UTC)
Posts: 12
Nat,

Thanks I will try to get the door open from the bottom..I will look at the contacts & see if they are dirty.. I may try to look at this tonight & let you know if anything worked....

Thanks for all the help
John
Back to top
libertyappl  
#10 Posted : Monday, September 22, 2008 11:42:32 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
Keep us posted.
Nat
Back to top
Users browsing this topic
Guest (10)
Similar Topics
whirlpool washer will not do anything but buzz and fill up. (Washer Repair)
by KayleeMaesmommy 4/25/2012 11:52:22 AM(UTC)
3 Pages123>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET