Rank: Member
Groups: Registered
Joined: 3/25/2008(UTC)
Posts: 1
|
I bought a new upper spray arm. When I attach it to the old upper spray arm bracket the arm hits the upper rack. Is the post on the upper bracket supposed to be slanted?:confused:
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/10/2008(UTC)
Posts: 2
|
Originally Posted by: cyndyh  I bought a new upper spray arm. When I attach it to the old upper spray arm bracket the arm hits the upper rack. Is the post on the upper bracket supposed to be slanted?:confused: I'm having the same issue. I've checked the diagram to make sure I'm not missing a piece and everything is correct. The spray arm hits the right side of the upper rack where it is deeper (lower) than the left side. Thanks for the help.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/10/2008(UTC)
Posts: 2
|
Anyone have any ideas why the spray arm is hitting the bottom right side of the upper rack?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
|
No the bracket isn't supposed to slanted. Check the tiered bracket which the arm connects to it could be broken. Also check the arm to make sure that nothing is lodged inside making it off balance.
Nat
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
