Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
akonas38  
#1 Posted : Wednesday, February 2, 2011 11:08:57 AM(UTC)
akonas38

Rank: Member

Groups: Registered
Joined: 2/2/2011(UTC)
Posts: 6

I am wondering if my control panel is shot. I timed the cycles for the short wash setting. It came out as five minutes for pre wash, ten for wash and 34 for rinse. These do not seem correct. Does anyone know cycle times well enough to advise me on this. The manual says the total cycle time should 65.5 minutes. As close as I can figure I am at 54 minutes.

Thanks Much
Ken Steil
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Thursday, February 3, 2011 12:38:54 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here is the tech sheet, see attachment

Looks to me that the shortest cycle would be about 50 minutes with the dry time.
File Attachment(s):
KUDS24.pdf (1,077kb) downloaded 2 time(s).
THIS FORUM IS DEAD!!!!!!!
akonas38  
#3 Posted : Thursday, February 3, 2011 10:12:17 AM(UTC)
akonas38

Rank: Member

Groups: Registered
Joined: 2/2/2011(UTC)
Posts: 6

Thanks Much,
The info seems to confirm that the control module is not operating properly since the "wash" and "clean" times are off in both the factory and the service test.

Ken Steil
Users browsing this topic
Guest (2)
Similar Topics
The plot thickens...(kinda) (Washer Repair)
by terrymanis1 1/19/2013 1:55:13 PM(UTC)
Kensmore coldspot frig/freezer (Refrigerator & Freezer Repair)
by marysunflower69 12/18/2011 12:26:08 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.