Rank: Member
Groups: Registered
Joined: 2/2/2011(UTC) Posts: 6
|
I am wondering if my control panel is shot. I timed the cycles for the short wash setting. It came out as five minutes for pre wash, ten for wash and 34 for rinse. These do not seem correct. Does anyone know cycle times well enough to advise me on this. The manual says the total cycle time should 65.5 minutes. As close as I can figure I am at 54 minutes.
Thanks Much Ken Steil
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC) Posts: 19,638
Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)
|
Here is the tech sheet, see attachment Looks to me that the shortest cycle would be about 50 minutes with the dry time. |
THIS FORUM IS DEAD!!!!!!! |
|
|
|
Rank: Member
Groups: Registered
Joined: 2/2/2011(UTC) Posts: 6
|
Thanks Much, The info seems to confirm that the control module is not operating properly since the "wash" and "clean" times are off in both the factory and the service test.
Ken Steil
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close