Roper washer starts to fill and stops - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Roper washer starts to fill and stops Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: RTW4440VQ1	Brand: Roper	Age: 1 - 5 years
Previous Topic Next Topic

phish_phinder		#1 Posted : Monday, January 17, 2011 7:33:21 AM(UTC)
Rank: Member Groups: Registered Joined: 1/17/2011(UTC) Posts: 4		Washer starts to fill and stops after 5 sec onds or so. Press the button in and out and stars back for 5 seconds, once filled it works fine. What is the problem?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

magician59		#2 Posted : Monday, January 17, 2011 7:50:06 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		Does it act the same in all the possible wash/rinse combinations you can select?


User Profile View All Posts by User View Thanks

phish_phinder		#3 Posted : Monday, January 17, 2011 8:02:28 AM(UTC)
Rank: Member Groups: Registered Joined: 1/17/2011(UTC) Posts: 4		Yes, normal , gentle , and perm. press all do the same thing.


User Profile View All Posts by User View Thanks

magician59		#4 Posted : Monday, January 17, 2011 8:21:23 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		I would suspect either ayour temperature selector switch, or a bad timer.


User Profile View All Posts by User View Thanks

phish_phinder		#5 Posted : Monday, January 17, 2011 8:26:42 AM(UTC)
Rank: Member Groups: Registered Joined: 1/17/2011(UTC) Posts: 4		I only use cold cold.... I do not have hot water supply. If I switch setting you say it might work?


User Profile View All Posts by User View Thanks

magician59		#6 Posted : Monday, January 17, 2011 8:33:57 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		If you switch the setting, and it does the same thing, I would suspect the timer. AFTERTHOUGHT: Check to see if the air tube from the water lever switch is clogged, kinked, or otherwise restricted. This switch really controlls the voltage to the water inlet valve; When the switch is satisfied (by pressure related to your fill level selected), the voltage to the valve is interrupted, and the timer then takes over the operation. If there is a restriction in the tube or the air dome attached to the tub (this can be a lint clog), the switch can be tricked into "thinking" there's water in the tub. Tell us what you find.


User Profile View All Posts by User View Thanks

phish_phinder		#7 Posted : Monday, January 17, 2011 10:22:06 AM(UTC)
Rank: Member Groups: Registered Joined: 1/17/2011(UTC) Posts: 4		Someone switched it to hot cold not knowing we didnt have hot water , problem solved, cant believe i overlooked where the setting was assuming i always keep it on cold cold, thanks for your help and glad I found this forum.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (4)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close