Dishwasher Stuck in run - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Dishwasher Stuck in run Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: PLD4375RFCO	Brand: Frigidaire	Age: 1 - 5 years
Previous Topic Next Topic

Ray Richardson		#1 Posted : Thursday, January 13, 2011 5:14:14 AM(UTC)
Rank: Member Groups: Registered Joined: 1/13/2011(UTC) Posts: 3		machine ran during night. but when we were to unload was still running with display flashing error and will not cancel. it seems to be running but i cannot tell whether it trying to pump water out or in. nothe is happening inside. dishes were clean.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Friday, January 14, 2011 2:44:47 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Replacement parts for FRIGIDAIRE PLD4375RFC0 Frigidaire/dishwasher \| AppliancePartsPros.com Here is the tech sheet http://manuals.frigidaire.com/prodinfo_pdf/Kinston/154580201en.pdf You did not say what the error was but the tech sheet does give the error codes. Try unplugging/remove power from the un it for 5 minutes or so to see if it will reset.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Ray Richardson		#3 Posted : Friday, January 14, 2011 11:12:10 AM(UTC)
Rank: Member Groups: Registered Joined: 1/13/2011(UTC) Posts: 3		Originally Posted by: denman Here are your parts Replacement parts for FRIGIDAIRE PLD4375RFC0 Frigidaire/dishwasher \| AppliancePartsPros.com Here is the tech sheet http://manuals.frigidaire.com/p.../Kinston/154580201en.pdf You did not say what the error was but the tech sheet does give the error codes. Try unplugging/remove power from the un it for 5 minutes or so to see if it will reset. Tried that did not work. Looks as though cycles until drain pump the stuck. I checked switch at over flow it ok. what next?


User Profile View All Posts by User View Thanks

denman		#4 Posted : Saturday, January 15, 2011 5:47:32 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Can you run the water/test (diagnostics). It may give a clue as to what is going on.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Ray Richardson		#5 Posted : Saturday, January 15, 2011 8:54:36 AM(UTC)
Rank: Member Groups: Registered Joined: 1/13/2011(UTC) Posts: 3		Originally Posted by: denman Can you run the water/test (diagnostics). It may give a clue as to what is going on. it let me run one earlier but know it will not. have been able to run rinse cycle but seems to run several cycles but sticks ti the 19 minutes shown. on the other cycles it runs for a while then gets the er code and stops. where as before it let the drain pump keep running.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close